EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on Atomization Characteristics of Droplet Field in the Downstream Region of Hydraulic Nozzles Under Co-Flow Disturbance

Zhirong Wu, Wen Li, Yongping Chen, Shiqiang Chen, Chunyu Liu

Processes · 06.07.2026 · 14 (13) · 2206

DOI: 10.3390/pr14132206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 06.07.2026. Verfasst von Zhirong Wu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Natural Science Foundation, Basic Ability Improvement Project for Young and Middle-Aged Teachers of the Education Department in Guangxi.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydraulic nozzles are widely utilized for dust removal, cooling, and waste heat recovery in mining production. Nevertheless, the influence of co-flow disturbance on the atomization characteristics within the downstream region of droplet fields remains inadequately understood. In this study, three typical hydraulic nozzles were selected, and the atomization characteristics of the downstream region under different co-flow disturbance intensities were experimentally investigated. The results reveal that increasing co-flow disturbance velocity does not intensify the reduction in sauter mean diameter (SMD), but markedly reduces the dispersed phase fraction (DPF). Under four co-flow disturbance velocities (1.5, 3.0, 4.5, and 6.0 m/s), the relative reduction rates of mean SMD are 6.77%, 3.27%, 4.42% and 2.60%, while those of mean DPF are 13.86%, 35.85%, 52.88%, and 61.86% (e.g., hollow-cone nozzle), respectively. The variation in SMD is achieved through the redistribution of cumulative volume among CV1, CV2, CV3, and CV4. As the velocity increases from 0 to 3 m/s, the mean SMD of the three hydraulic nozzles exhibits a decreasing trend, which can be directly attributed to the continuous increase in the total cumulative volume of CV1 and CV2, and the continuous decrease in those of CV3 and CV4. For the hollow-cone and solid square-cone nozzles, the SMD first decreases and then increases, with the turning point occurring at 3.0 m/s, consistent with the variation trend of cumulative volume fractions. In contrast, for the solid-cone nozzle, the SMD continues to decrease at velocities exceeding 3.0 m/s. This work provides both a fundamental understanding of atomization characteristics in the downstream region of hydraulic nozzles under co-flow disturbance and practical guidance for velocity control in mine spray systems.

Förderung

  • Guangxi Natural Science Foundation
  • Basic Ability Improvement Project for Young and Middle-Aged Teachers of the Education Department in Guangxi

Zitieren

APA

Wu, Z., Li, W., Chen, Y., Chen, S., & Liu, C. (2026). Experimental Study on Atomization Characteristics of Droplet Field in the Downstream Region of Hydraulic Nozzles Under Co-Flow Disturbance. Processes, 14(13), 2206. https://doi.org/10.3390/pr14132206

Vancouver

Wu Z, Li W, Chen Y, Chen S, Liu C. Experimental Study on Atomization Characteristics of Droplet Field in the Downstream Region of Hydraulic Nozzles Under Co-Flow Disturbance. Processes. 2026;14(13):2206. doi:10.3390/pr14132206

BibTeX
@article{Wu2026,
  author = {Wu, Zhirong and Li, Wen and Chen, Yongping and Chen, Shiqiang and Liu, Chunyu},
  title = {Experimental Study on Atomization Characteristics of Droplet Field in the Downstream Region of Hydraulic Nozzles Under Co-Flow Disturbance},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {2206},
  doi = {10.3390/pr14132206}
}
Kostenlos starten →