Rheological Properties of Film-Forming Gels Based on Collagen from Octopus maya By-Products and Food-Grade Polysaccharides
Processes · 06.07.2026 · 14 (13) · 2205
DOI: 10.3390/pr14132205 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 06.07.2026. Verfasst von María Fernanda Acosta-Pacheco und 4 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Project 6559 “Plataforma Tecnológica Pulpo maya para el Desarrollo de Productos de Alto Valor Agregado”, SECIHTI.
Abstract (Originalsprache)
Octopus maya is a fast-growing species from the Yucatán Peninsula with high economic relevance, accounting for a major share of regional fishery production. However, a significant fraction of the organism, rich in type I collagen, is discarded as by-products, representing a promising and underutilized source for sustainable biomaterials. This study evaluated, through a 32 factorial design, the effect of two factors on the rheological and dynamic mechanical properties of film-forming solutions (FFS). The first factor was the type of food-grade polysaccharide: chitosan (Ch), hydroxypropyl methylcellulose (HPMC), or starch (S). The second factor was the proportion of each polysaccharide blended with ultrasound-extracted Octopus maya insoluble collagen (CIPM), using polysaccharide ratios of 30:70, 50:50, and 70:30 (w/w). This approach aims to valorize octopus by-products through the recovery and functional utilization of collagen. Rheological properties were determined by rotational and oscillatory rheometry at 25 °C, with flow curves fitted to the Carreau-Yasuda model. All formulations exhibited pseudoplastic behavior (n < 1), with viscosity decreasing as shear rate increased. Pure CIPM showed high viscosity (190.36 Pa·s at 1 s−1), which decreased (0.3–10.44 Pa·s) in HPMC and chitosan systems, suggesting their potential suitability for applications requiring fluidity, such as spray coatings or film-forming solutions, based on their rheological properties. In contrast, starch-based systems exhibited higher viscosities (33.54–197.53 Pa·s) and a more structured viscoelastic profile (G′ > G″), suggesting potential suitability for thick coatings or gels requiring structural stability, although these applications were not experimentally validated. These results demonstrate that CIPM-polysaccharide systems enable tunable rheological properties, supporting the use of Octopus maya collagen as a sustainable functional material for advanced food and biomaterial design.
Förderung
- Project 6559 “Plataforma Tecnológica Pulpo maya para el Desarrollo de Productos de Alto Valor Agregado”
- SECIHTI
Zitieren
APA
Acosta-Pacheco, M. F., Gastélum-Martínez, É., Cauich-Rodríguez, J. V., Rodríguez-Buenfil, I. M., & Ramírez-Sucre, M. O. (2026). Rheological Properties of Film-Forming Gels Based on Collagen from Octopus maya By-Products and Food-Grade Polysaccharides. Processes, 14(13), 2205. https://doi.org/10.3390/pr14132205
Vancouver
Acosta-Pacheco MF, Gastélum-Martínez É, Cauich-Rodríguez JV, Rodríguez-Buenfil IM, Ramírez-Sucre MO. Rheological Properties of Film-Forming Gels Based on Collagen from Octopus maya By-Products and Food-Grade Polysaccharides. Processes. 2026;14(13):2205. doi:10.3390/pr14132205
BibTeX
@article{AcostaPacheco2026,
author = {Acosta-Pacheco, María Fernanda and Gastélum-Martínez, Élida and Cauich-Rodríguez, Juan Valerio and Rodríguez-Buenfil, Ingrid Mayanin and Ramírez-Sucre, Manuel Octavio},
title = {Rheological Properties of Film-Forming Gels Based on Collagen from Octopus maya By-Products and Food-Grade Polysaccharides},
journal = {Processes},
year = {2026},
volume = {14},
number = {13},
pages = {2205},
doi = {10.3390/pr14132205}
}
EUVIMED