EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Shear-Responsive Gel for Lost Circulation Control Tailored to Enhance Drilling Rate of Penetration

Shoushuai Huang, Zhigang Zhang, Jian Mao, Bin Li, Ruigang Yuan, Zhaomin Jiang, Shubin Liu

Processes · 03.07.2026 · 14 (13) · 2168

DOI: 10.3390/pr14132168 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 03.07.2026. Verfasst von Shoushuai Huang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lost circulation of wellbore fluids within fissured zones constitutes a primary factor contributing to increased non-productive time (NPT) and restricted rate of penetration (ROP). Conventional gel-based lost circulation materials (LCMs) inherently suffer from a tradeoff between pumpability and in situ fracture retention, and they lack a design methodology quantitatively correlated with drilling engineering parameters. In this study, a shear-responsive gel with a dual physically crosslinked network—combining hydrophobic association and Fe3+-mediated ionic coordination—was prepared through a single-step water-based radical polymerization process, utilizing commercially available monomers. By systematically tuning the hydrophobic monomer and Fe3+ contents, the gel’s fracture-sealing efficacy, autogenous healing ability, and shear rheological characteristics were evaluated, establishing a quantitative correlation between the critical shear rate and drilling parameters. The empirical data demonstrate that with an increase in the hydrophobic monomer dosage from 0.4 wt% to 1.2 wt%, the critical shear rate decreases from 22.5 s−1 to 8.6 s−1, exhibiting an exponential decay relationship. The optimized formulation, G0.8F0.5, demonstrates a low initial viscosity of 245 mPa·s under high shear conditions, which surges to 6180 mPa·s at a shear rate of 14.2 s−1, achieving a thickening factor of 29.4. Upon incubation at 80 °C for a duration of 12 h, the formulated gel restores 94.9% of its mechanical tensile strength and 96.3% of its fracture strain, whereas the Fe3+-free control sample fails to heal. In dynamic plugging tests using a 3 mm fracture plate, G0.8F0.5 achieves a breakthrough pressure of 12.8 MPa with a minimal fluid loss of 98 mL. The LCM forms a monolithic gel block positioned at the middle-to-rear section of the fracture, outperforming conventional gel counterparts. Drilling hydraulics simulations reveal that deploying this gel reduces the annular equivalent circulating density (ECD) by 0.06 g/cm3. Furthermore, under idealized conditions, this approach is calculated to enhance the ROP by approximately 26%. The proposed molecular design of a shear-responsive, dual physically crosslinked network provides a viable technical pathway for quantitatively tailoring the shear-responsive properties of while-drilling LCMs.

Zitieren

APA

Huang, S., Zhang, Z., Mao, J., Li, B., Yuan, R., Jiang, Z., & Liu, S. (2026). Development of a Shear-Responsive Gel for Lost Circulation Control Tailored to Enhance Drilling Rate of Penetration. Processes, 14(13), 2168. https://doi.org/10.3390/pr14132168

Vancouver

Huang S, Zhang Z, Mao J, Li B, Yuan R, Jiang Z, et al. Development of a Shear-Responsive Gel for Lost Circulation Control Tailored to Enhance Drilling Rate of Penetration. Processes. 2026;14(13):2168. doi:10.3390/pr14132168

BibTeX
@article{Huang2026,
  author = {Huang, Shoushuai and Zhang, Zhigang and Mao, Jian and Li, Bin and Yuan, Ruigang and Jiang, Zhaomin and Liu, Shubin},
  title = {Development of a Shear-Responsive Gel for Lost Circulation Control Tailored to Enhance Drilling Rate of Penetration},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {2168},
  doi = {10.3390/pr14132168}
}
Kostenlos starten →