Research on the Characteristics of Mismatch Horizontal Deformation in Primary Coal-Rock Combination
Processes · 28.06.2026 · 14 (13) · 2100
DOI: 10.3390/pr14132100 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 28.06.2026. Verfasst von Qiang Fu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Innovation and Entrepreneurship Fund of China Coal Science and Industry Group.
Abstract (Originalsprache)
The essence of coal-rock dynamic disasters is the instantaneous instability that occurs when the coal-rock combination system reaches its strength limit. The differing mechanical properties of coal and rock lead to mismatching deformation within the combination, thereby altering the mechanical characteristics of the coal-rock body under combination structures. Consequently, studying the mismatching horizontal deformation of coal-rock combinations is significant for the prevention and control of coal-rock dynamic disasters. To investigate the mismatching horizontal deformation characteristics of primary coal-rock combinations, this study conducted uniaxial and conventional triaxial loading experiments on primary coal-rock combinations to obtain their strength and horizontal deformation characteristics. Subsequently, numerical simulations were performed to analyze the factors influencing the horizontal deformation of primary coal-rock combinations, ultimately leading to the construction of a horizontal deformation distribution model for primary coal-rock combinations. The research results indicate that due to the influence of the coal-rock interface, the primary coal-rock combinations exhibit continuous and smooth mismatching horizontal deformation under loading conditions, with the magnitude of deformation ordered as coal > interface > rock. The influence of the interface on the horizontal deformation of the coal-rock body does not suddenly vanish; rather, it gradually diminishes with increasing distance from the interface, becoming negligible at approximately 48% of the model’s lateral dimensions. A horizontal deformation mismatch distribution model for primary coal-rock combinations was established based on the Sigmoid function, and the key parameter b in the model was obtained through fitting with numerical simulation results. The reliability of the model was subsequently validated through experimental results. The findings of this study provide a basis for further research on the mechanical properties and deformation characteristics of coal-rock combinations.
Förderung
- National Natural Science Foundation of China
- Science and Technology Innovation and Entrepreneurship Fund of China Coal Science and Industry Group
Zitieren
APA
Fu, Q., Du, T., Cai, Y., Xu, C., Qin, Z., Sun, R., & Yan, R. (2026). Research on the Characteristics of Mismatch Horizontal Deformation in Primary Coal-Rock Combination. Processes, 14(13), 2100. https://doi.org/10.3390/pr14132100
Vancouver
Fu Q, Du T, Cai Y, Xu C, Qin Z, Sun R, et al. Research on the Characteristics of Mismatch Horizontal Deformation in Primary Coal-Rock Combination. Processes. 2026;14(13):2100. doi:10.3390/pr14132100
BibTeX
@article{Fu2026,
author = {Fu, Qiang and Du, Taotao and Cai, Yongbo and Xu, Chao and Qin, Zihan and Sun, Ruda and Yan, Ruibing},
title = {Research on the Characteristics of Mismatch Horizontal Deformation in Primary Coal-Rock Combination},
journal = {Processes},
year = {2026},
volume = {14},
number = {13},
pages = {2100},
doi = {10.3390/pr14132100}
}
EUVIMED