EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Branch Y-Shaped Fins for Accelerated Melting in Shell-And-Tube Latent Heat Storage: An Integrated 2D Geometric Screening and 3D Operating-Condition Study

Zerui Chen, Xin Wu, Hangfeng Li, Huan Li, Houpeng Hu, Shijie Zhang

Processes · 26.06.2026 · 14 (13) · 2084

DOI: 10.3390/pr14132084 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 26.06.2026. Verfasst von Zerui Chen und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Southern Power Grid Corporation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The low thermal conductivity of phase-change materials (PCMs) remains a primary barrier to rapid charging in shell-and-tube latent heat thermal energy storage (LHTES). This work proposes a hierarchical multi-branch Y-shaped fin network with extended conductive pathways and evaluates its performance through a two-stage numerical framework, including two-dimensional (2D) geometric screening of fin topology and arrangement followed by three-dimensional (3D) simulations under practical operating conditions. The enthalpy-porosity method and the Boussinesq approximation are used to resolve transient melting and buoyancy-driven convection in RT35 paraffin. In the 2D comparison, the optimized multi-branch topology improves temperature uniformity and advances the melting front more effectively than finless and straight-fin structures, reducing complete melting time by 68.6% and 41.4%, respectively. Rotational arrangement further affects the coupling between conductive paths and natural-convection cells; the best arrangement shortens melting time by 29.8% relative to alternative layouts. In the 3D model, increasing inlet velocity from 0.06 to 0.16 m/s reduces melting time by 44.3% but produces limited gains in stored energy, indicating diminishing returns at high flow rate. Increasing inlet temperature from 333 to 363 K is more influential, reducing melting time by 47.9%, increasing stored energy by 10.6%, and raising average heat-flux density from 500.10 to 1062.16 W/m2. The results demonstrate that the hierarchical branched fin network accelerates thermal charging by redistributing and extending conductive pathways, while inlet temperature governs both melting kinetics and final storage capacity.

Förderung

  • China Southern Power Grid Corporation

Zitieren

APA

Chen, Z., Wu, X., Li, H., Li, H., Hu, H., & Zhang, S. (2026). Multi-Branch Y-Shaped Fins for Accelerated Melting in Shell-And-Tube Latent Heat Storage: An Integrated 2D Geometric Screening and 3D Operating-Condition Study. Processes, 14(13), 2084. https://doi.org/10.3390/pr14132084

Vancouver

Chen Z, Wu X, Li H, Li H, Hu H, Zhang S. Multi-Branch Y-Shaped Fins for Accelerated Melting in Shell-And-Tube Latent Heat Storage: An Integrated 2D Geometric Screening and 3D Operating-Condition Study. Processes. 2026;14(13):2084. doi:10.3390/pr14132084

BibTeX
@article{Chen2026,
  author = {Chen, Zerui and Wu, Xin and Li, Hangfeng and Li, Huan and Hu, Houpeng and Zhang, Shijie},
  title = {Multi-Branch Y-Shaped Fins for Accelerated Melting in Shell-And-Tube Latent Heat Storage: An Integrated 2D Geometric Screening and 3D Operating-Condition Study},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {2084},
  doi = {10.3390/pr14132084}
}
Kostenlos starten →