EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Minimum Miscibility Pressure of CO2–Oil System in Deep High-Temperature and High-Pressure Reservoirs

Hong-Mei Wang, Li-Jian Li, Hong Chen, Wei Xiong, Ye Tian, Yu-Long Zhao, Yu-Jia Zeng, Xian-Yu Jiang

Processes · 25.06.2026 · 14 (13) · 2073

DOI: 10.3390/pr14132073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 25.06.2026. Verfasst von Hong-Mei Wang und 7 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Major Project, Sichuan Science and Technology Program, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Deep high-temperature and high-pressure (HTHP) oil reservoirs have limited experimental MMP data, large differences between reservoir and saturation pressures, low gas–oil ratios, and pressure-sensitive CO2–oil phase behavior, which make both minimum miscibility pressure (MMP) prediction and miscibility-mechanism identification challenging. To address these gaps, this study determines the MMP of a CO2–oil system by integrating slim-tube experiments, empirical formula methods, the Multiple Mixed-Cell (MMC) method, the Method of Characteristics (MOC), compositional numerical simulation, and three intelligent algorithm models (GWO-RBF, GWO-LSSVM, and GWO-SVM). The slim-tube MMP of 44.13 MPa at 140 °C is used as the experimental reference for comparing prediction errors, whereas PVTsim and literature data are used for consistency checks and model benchmarking. The results show that when the injected CO2 mole fraction exceeds 0.88, the formation oil under original reservoir conditions cannot achieve first-contact miscibility with CO2, and the maximum dissolved CO2–oil molar ratio is 7.3:1. Supercritical CO2 forms dual displacement mechanisms, including front-end vaporizing miscible drive and rear-end condensing miscible drive, but the dominant mechanism for this CO2–oil system is vaporizing miscible drive. During the vaporizing gas drive, the CO2 + N2 + C1 content in the liquid phase increases from less than 60% to nearly 90%, indicating significant CO2 dissolution into oil and associated density and viscosity reduction; meanwhile, the C7+ content in the gas phase increases to nearly 10%, indicating extraction of heavy components. Relative to the slim-tube reference at 140 °C, the deviations of MMC, GWO-SVM, GWO-LSSVM, compositional numerical simulation, GWO-RBF, MOC, and empirical formula methods are 2.97%, 3.08%, 3.40%, 4.24%, 4.26%, 11.62%, and 19.74%, respectively. The MMC method is the most suitable approach for this specific HTHP oil system, while intelligent algorithms should be regarded as supplementary predictors whose reliability depends on training-domain coverage and independent validation.

Förderung

  • National Science and Technology Major Project
  • Sichuan Science and Technology Program
  • National Natural Science Foundation of China

Zitieren

APA

Wang, H., Li, L., Chen, H., Xiong, W., Tian, Y., Zhao, Y., Zeng, Y., & Jiang, X. (2026). Study on Minimum Miscibility Pressure of CO2–Oil System in Deep High-Temperature and High-Pressure Reservoirs. Processes, 14(13), 2073. https://doi.org/10.3390/pr14132073

Vancouver

Wang H, Li L, Chen H, Xiong W, Tian Y, Zhao Y, et al. Study on Minimum Miscibility Pressure of CO2–Oil System in Deep High-Temperature and High-Pressure Reservoirs. Processes. 2026;14(13):2073. doi:10.3390/pr14132073

BibTeX
@article{Wang2026,
  author = {Wang, Hong-Mei and Li, Li-Jian and Chen, Hong and Xiong, Wei and Tian, Ye and Zhao, Yu-Long and Zeng, Yu-Jia and Jiang, Xian-Yu},
  title = {Study on Minimum Miscibility Pressure of CO2–Oil System in Deep High-Temperature and High-Pressure Reservoirs},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {2073},
  doi = {10.3390/pr14132073}
}
Kostenlos starten →