EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo-Hydraulic and Thermodynamic Analysis of Rotational–Perforated Static Mixer

Hongrui Wei, Xuefang Gao, Dewu Wang, Yan Liu, Ruojin Wang, Zixuan Guo, Lei Wang, Meng Tang, Shaofeng Zhang

Processes · 25.06.2026 · 14 (13) · 2060

DOI: 10.3390/pr14132060 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 25.06.2026. Verfasst von Hongrui Wei und 8 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Education Commission Research Program of Tianjin, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To clarify the thermo-hydraulic performance and thermodynamic characteristics of rotational–perforated static mixer (RPSM) for laminar heat transfer enhancement in circular tubes, a three-dimensional steady laminar flow model was developed for inlet Reynolds numbers from 200 to 1000. The heat transfer enhancement, resistance increase, and irreversible losses of RPSM with two installation modes and Kenics were comparatively analyzed. The results show that RPSM (forward) exhibits the strongest practical heat transfer performance. Its convective heat transfer coefficient is on average 39.8% higher than that of Kenics, while its thermal effectiveness and number of transfer units are increased by 21.3% and 32.8%, respectively. However, the heat transfer enhancement of RPSM is accompanied by a significant increase in flow resistance. The Z-factors of RPSM (forward) and RPSM (backward) are approximately 3.4 and 6.2 times that of Kenics, respectively. Second law analysis shows that the Bejan numbers of all configurations are close to unity, indicating that total entropy generation is mainly dominated by heat transfer entropy generation. Although RPSM (forward) has a higher exergy destruction rate, its second law efficiency is on average 20.1% higher than that of Kenics. Flow–heat transfer coupling visualization shows that RPSM (forward) can maintain relatively continuous swirling and secondary flow structures, thereby promoting radial energy transport and temperature field uniformity. In contrast, RPSM (backward) induces stronger local recirculation and pressure loss, resulting in higher pumping power demand. Overall, for the specific RPSM geometry and Reynolds number range investigated in this study, RPSM (forward) shows advantages in heat transfer capacity and thermal exergy utilization, but these advantages are accompanied by a substantial flow resistance penalty. Therefore, further structural optimization should focus on retaining radial transport while reducing local pressure loss.

Förderung

  • Education Commission Research Program of Tianjin, China

Zitieren

APA

Wei, H., Gao, X., Wang, D., Liu, Y., Wang, R., Guo, Z., Wang, L., Tang, M., & Zhang, S. (2026). Thermo-Hydraulic and Thermodynamic Analysis of Rotational–Perforated Static Mixer. Processes, 14(13), 2060. https://doi.org/10.3390/pr14132060

Vancouver

Wei H, Gao X, Wang D, Liu Y, Wang R, Guo Z, et al. Thermo-Hydraulic and Thermodynamic Analysis of Rotational–Perforated Static Mixer. Processes. 2026;14(13):2060. doi:10.3390/pr14132060

BibTeX
@article{Wei2026,
  author = {Wei, Hongrui and Gao, Xuefang and Wang, Dewu and Liu, Yan and Wang, Ruojin and Guo, Zixuan and Wang, Lei and Tang, Meng and Zhang, Shaofeng},
  title = {Thermo-Hydraulic and Thermodynamic Analysis of Rotational–Perforated Static Mixer},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {2060},
  doi = {10.3390/pr14132060}
}
Kostenlos starten →