EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research and Application of a Visual Simulation and Evaluation Apparatus for the Fracture Plugging Process

Yan Ye, Xingyu Li, Fuliang Guo, Ning Yang, Feng Lu, Yayun Guo, Shucheng Dai

Processes · 23.06.2026 · 14 (13) · 2039

DOI: 10.3390/pr14132039 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 23.06.2026. Verfasst von Yan Ye und 6 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lost circulation in fractured formations is a major challenge during drilling operations, while conventional plugging evaluation methods relying solely on pressure-bearing curves and fluid-loss data often fail to accurately distinguish effective internal plugging from ineffective plugging behavior. To address this issue, a visualized plugging evaluation apparatus with high pressure-bearing capacity and large-window observation capability was developed to directly observe the plugging process and evaluate plugging performance under different fracture conditions. Based on the Ideal Packing Theory and the D90 rule, plugging formulations were systematically evaluated under different fracture-width coefficients, slurry concentrations, and fracture-width conditions. The results showed that excessively large fracture-width coefficients or excessively high slurry concentrations could lead to premature “external plugging,” in which plugging materials accumulated near the fracture entrance without forming effective internal plugging structures. Although such cases exhibited rapid pressure buildup, visual observations confirmed that the fracture itself remained insufficiently sealed. Under the present experimental conditions, the optimized formulation with a fracture-width coefficient of 0.8 W and a slurry concentration of 25% exhibited the best overall plugging performance. The formulation reached 10 MPa in approximately 2650 s and successfully formed stable internal plugging structures under different fracture-width conditions, with the maximum variation in plugging time remaining within 7%. Field applications in Well BD-X further validated the effectiveness of the proposed method and optimized formulations under real drilling conditions. The developed apparatus and evaluation method provide a reliable experimental approach for optimizing plugging formulations and preventing lost circulation in fractured formations.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Ye, Y., Li, X., Guo, F., Yang, N., Lu, F., Guo, Y., & Dai, S. (2026). Research and Application of a Visual Simulation and Evaluation Apparatus for the Fracture Plugging Process. Processes, 14(13), 2039. https://doi.org/10.3390/pr14132039

Vancouver

Ye Y, Li X, Guo F, Yang N, Lu F, Guo Y, et al. Research and Application of a Visual Simulation and Evaluation Apparatus for the Fracture Plugging Process. Processes. 2026;14(13):2039. doi:10.3390/pr14132039

BibTeX
@article{Ye2026,
  author = {Ye, Yan and Li, Xingyu and Guo, Fuliang and Yang, Ning and Lu, Feng and Guo, Yayun and Dai, Shucheng},
  title = {Research and Application of a Visual Simulation and Evaluation Apparatus for the Fracture Plugging Process},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {13},
  pages = {2039},
  doi = {10.3390/pr14132039}
}
Kostenlos starten →