EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Sealing Performance and Structural Optimization of Foot-Shaped Slip Ring Seals for Reciprocating Seal Shafts

Xuesong Zhang, Defei Chen, Zhida Zhang, Peng Cao, Zihan Jin, Guorong Wang, Gang Hu

Processes · 13.06.2026 · 14 (12) · 1936

DOI: 10.3390/pr14121936 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 13.06.2026. Verfasst von Xuesong Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Science and Technology Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to study the optimal size and sealing performance of the foot-shaped slip ring for reciprocating seal, the loading method of fluid pressure penetration is used to simulate the effect of fluid medium pressure on the seal, and the multi-objective optimization of the geometry of the slip ring is carried out based on optimization software to obtain the best combination of parameters for the foot-shaped slip ring. The effects of slip ring geometry, pre-compression and working pressure on Von Mises stress and contact pressure were investigated using the finite element method. The results show that the optimized geometry of the foot-shaped slip ring can reduce the maximum contact stress on the main sealing surface from 108.5 MPa to 75.22 MPa (a reduction of 30.7%) and decrease the maximum Von Mises stress of the slip ring from 62.84 MPa to 41.57 MPa (a reduction of 33.8%), thereby greatly reducing the wear of the slip ring while ensuring reliable sealing. In the static sealing condition, a smaller pre-compression (1.2–1.3 mm) leads to stress concentration in the O-ring, and the recommended pre-compression range is 1.4–1.6 mm. In the dynamic sealing condition, the effect of pre-compression on the sealing performance is greater than that of reciprocating motion speed on the sealing performance, and the foot-shaped slip ring seal is found to be more suitable for low-speed operation at 0.1–0.2 m/s. The optimized design provides a data-driven methodology for enhancing the reliability and service life of reciprocating seals in high-pressure environments.

Förderung

  • Sichuan Science and Technology Program

Zitieren

APA

Zhang, X., Chen, D., Zhang, Z., Cao, P., Jin, Z., Wang, G., & Hu, G. (2026). Research on Sealing Performance and Structural Optimization of Foot-Shaped Slip Ring Seals for Reciprocating Seal Shafts. Processes, 14(12), 1936. https://doi.org/10.3390/pr14121936

Vancouver

Zhang X, Chen D, Zhang Z, Cao P, Jin Z, Wang G, et al. Research on Sealing Performance and Structural Optimization of Foot-Shaped Slip Ring Seals for Reciprocating Seal Shafts. Processes. 2026;14(12):1936. doi:10.3390/pr14121936

BibTeX
@article{Zhang2026,
  author = {Zhang, Xuesong and Chen, Defei and Zhang, Zhida and Cao, Peng and Jin, Zihan and Wang, Guorong and Hu, Gang},
  title = {Research on Sealing Performance and Structural Optimization of Foot-Shaped Slip Ring Seals for Reciprocating Seal Shafts},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {12},
  pages = {1936},
  doi = {10.3390/pr14121936}
}
Kostenlos starten →