Influence of Artificial Fracture Angles on the Pressure Relief Mechanism of Dynamic Pressure Roadways
Processes · 12.06.2026 · 14 (12) · 1917
DOI: 10.3390/pr14121917 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 12.06.2026. Verfasst von Jiangwei Liu und 3 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province.
Abstract (Originalsprache)
With deep coal mining in China, high in situ stress frequently causes severe floor deformation, bolt-cable support failure, and excessive floor heave, which critically threaten mine safety. In this study, we use physical experiments, numerical simulation, and theoretical analysis to explore how hydraulic fractures with different azimuth angles affect stress transfer in roadways under floor dynamic pressure. Prefabricated fractures simulate weak planes induced by hydraulic fracturing. Uniaxial compression tests and PFC2D fluid–solid coupling simulations analyze mechanical properties, failure modes, acoustic emission behavior, and stress distribution. Results show that fracture azimuth significantly controls rock damage and failure modes. As the angle increases from 0° to 90°, failure changes from gradual degradation to sudden instability. Peak strength first decreases then increases, reaching the minimum at 22.5°, while roadway damage is minimal at 45°. Small-angle fractures lead to shear failure with clear precursors, and large-angle fractures cause sudden tensile failure. Hydraulic fractures form directional stress-relief zones and enable effective stress transfer and pressure relief. The results support parameter optimization of hydraulic fracturing and stability control for deep roadways under floor dynamic pressure.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shandong Province
Zitieren
APA
Liu, J., Wang, P., Li, X., & Li, N. (2026). Influence of Artificial Fracture Angles on the Pressure Relief Mechanism of Dynamic Pressure Roadways. Processes, 14(12), 1917. https://doi.org/10.3390/pr14121917
Vancouver
Liu J, Wang P, Li X, Li N. Influence of Artificial Fracture Angles on the Pressure Relief Mechanism of Dynamic Pressure Roadways. Processes. 2026;14(12):1917. doi:10.3390/pr14121917
BibTeX
@article{Liu2026,
author = {Liu, Jiangwei and Wang, Puci and Li, Xuelong and Li, Nan},
title = {Influence of Artificial Fracture Angles on the Pressure Relief Mechanism of Dynamic Pressure Roadways},
journal = {Processes},
year = {2026},
volume = {14},
number = {12},
pages = {1917},
doi = {10.3390/pr14121917}
}
EUVIMED