Investigating the Mechanical Properties of Joint in Dissimilar Laser Welding of Polypropylene to Polyethylene
Processes · 05.06.2026 · 14 (11) · 1833
DOI: 10.3390/pr14111833 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 05.06.2026. Verfasst von Maged Faihan Alotaibi. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research (DSR) at King Abdulaziz University, Jeddah, Saudi Arabia.
Abstract (Originalsprache)
Joining dissimilar polymers such as polypropylene (PP) and high-density polyethylene (HDPE) remains a challenge in modern manufacturing due to their incompatible thermal properties and poor interfacial bonding. In this study, a novel hybrid structure was fabricated by laser welding of PP to an HDPE matrix reinforced with 3 wt% carbon nanotubes (CNTs). The CNTs were incorporated via fused filament fabrication (FFF) 3D printing to raise the melting temperature and thermal stability of HDPE, thereby minimizing the thermal mismatch with PP. A pulsed CO2 laser was used to perform butt welding, and the influences of pulse frequency, welding speed, and laser power on the elastic modulus and tensile properties of the weld samples were thoroughly studied. A response surface design was employed to build predictive models and perform multi-objective optimization. The addition of CNTs, as evidenced by differential scanning calorimetry (DSC), elevated the crystallinity level of HDPE from 48.3% to 53.1% and the melting point from 137.8 to 140.8 °C, making its thermal properties more comparable to those of PP. Observations via scanning electron microscopy (SEM) indicated that when the optimal parameters were applied (pulse frequency: 35 Hz, welding speed: 21 mm/s, and laser power: 49 W), the joint line was defect-free, fully fused, and contained very few voids. At these settings, the model estimated an elastic modulus of 793 MPa and a tensile strength of 49.6 MPa, while confirmation experiments yielded 47.2 MPa and 764.5 MPa, respectively, with relative errors below 5%. The results demonstrate that the combination of CNT-assisted laser welding and RSM-driven optimization effectively resolves the thermal incompatibility of HDPE and PP, thereby facilitating high-quality joining of dissimilar polymers for applications in packaging and automotive fields.
Förderung
- Scientific Research (DSR) at King Abdulaziz University, Jeddah, Saudi Arabia
Zitieren
APA
Alotaibi, M. F. (2026). Investigating the Mechanical Properties of Joint in Dissimilar Laser Welding of Polypropylene to Polyethylene. Processes, 14(11), 1833. https://doi.org/10.3390/pr14111833
Vancouver
Alotaibi MF. Investigating the Mechanical Properties of Joint in Dissimilar Laser Welding of Polypropylene to Polyethylene. Processes. 2026;14(11):1833. doi:10.3390/pr14111833
BibTeX
@article{Alotaibi2026,
author = {Alotaibi, Maged Faihan},
title = {Investigating the Mechanical Properties of Joint in Dissimilar Laser Welding of Polypropylene to Polyethylene},
journal = {Processes},
year = {2026},
volume = {14},
number = {11},
pages = {1833},
doi = {10.3390/pr14111833}
}
EUVIMED