EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Wellbore Pressure Distribution Characteristics in Double-Wall Drill Pipe Reverse Circulation Drilling

Mingming Geng, Hui Zhang, Yiming Ma, Geng Zhang, Baokang Wu, Long Chen, Yiwen Huang

Processes · 24.05.2026 · 14 (11) · 1695

DOI: 10.3390/pr14111695 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 24.05.2026. Verfasst von Mingming Geng und 6 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Double-wall drill pipe reverse circulation drilling is expected to alleviate cutting-transport difficulties and the high risk of lost circulation during the shallow-section drilling of ultra-deep wells. Based on wellbore hydraulics theory and a transient solid–liquid two-phase flow model in the wellbore, considering the flow path transition effect at the reverse circulation converter near the bit, a corrected pressure loss method for the inner pipe accounting for cuttings influence is proposed, and a correlation for calculating the converter pressure loss is derived. A wellbore pressure calculation model for reverse circulation drilling using a double-wall drill pipe is then established. Furthermore, the influencing factors are investigated through sensitivity analysis, and a pump pressure selection chart is developed. Field-case calculations indicate that, under identical operating conditions, the bottomhole pressure in double-wall drill pipe reverse circulation drilling is reduced by approximately 6.31 MPa compared with conventional drilling. For shallow sections (well depth of about 1200 m) under flow rates of 20–40 L/s and drilling-fluid densities of 1200–1400 kg/m3, the maximum total circulating wellbore pressure loss, after incorporating surface flowline pressure losses, is approximately 10.91 MPa. In this case, a single pump can satisfy the circulation requirement, demonstrating the advantages of simplified equipment configuration and improved field adaptability for shallow-section operations. The proposed model and charts can provide a reference for parameter optimization and pressure-control design in double-wall drill pipe reverse circulation drilling.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Geng, M., Zhang, H., Ma, Y., Zhang, G., Wu, B., Chen, L., & Huang, Y. (2026). Study on Wellbore Pressure Distribution Characteristics in Double-Wall Drill Pipe Reverse Circulation Drilling. Processes, 14(11), 1695. https://doi.org/10.3390/pr14111695

Vancouver

Geng M, Zhang H, Ma Y, Zhang G, Wu B, Chen L, et al. Study on Wellbore Pressure Distribution Characteristics in Double-Wall Drill Pipe Reverse Circulation Drilling. Processes. 2026;14(11):1695. doi:10.3390/pr14111695

BibTeX
@article{Geng2026,
  author = {Geng, Mingming and Zhang, Hui and Ma, Yiming and Zhang, Geng and Wu, Baokang and Chen, Long and Huang, Yiwen},
  title = {Study on Wellbore Pressure Distribution Characteristics in Double-Wall Drill Pipe Reverse Circulation Drilling},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {1695},
  doi = {10.3390/pr14111695}
}
Kostenlos starten →