EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polyethersulfone/Attapulgite Membranes Obtained by Solvent Evaporation for Water Vapor Permeation Control

Bruna Aline Araujo, Rafael Agra Dias, Pamela Thainara Vieira da Silva, Rene Anisio da Paz, Vanessa da Nobrega Medeiros, Carlos Bruno Barreto Luna, Renate Maria Ramos Wellen, Luiz Antônio Pessan, Edcleide Maria Araújo

Processes · 01.05.2026 · 14 (9) · 1475

DOI: 10.3390/pr14091475 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 01.05.2026. Verfasst von Bruna Aline Araujo und 8 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FAPESQ, National Council for Scientific and Technological Development (CNPq) through the Research Productivity Grants (PQ) awarded to researchers Renate Maria Ramos We…, Edcleide Maria Araújo.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the development of mixed matrix membranes based on polyethersulfone incorporated with attapulgite for gas separation applications, addressing the existing gap regarding the use of this mineral in dense membranes obtained exclusively by solvent evaporation and its combined effects on microstructure and transport. The membranes were prepared by phase inversion via solvent evaporation, using solvent/polymer ratios of 75/25 and 80/20 and a thickness of 0.25 mm. The solutions were evaluated in terms of viscosity, and the membranes were characterized by structural techniques such as X-ray diffraction (XRD), atomic force microscope (AFM), contact angle, mechanical properties (tensile testing), and water vapor permeation. The results showed that attapulgite incorporation promoted a reduction in surface roughness (up to ~40%) and a decrease in contact angle (from ~89° to ~68°), indicating increased hydrophilicity. In addition, water vapor permeability was influenced in a non-linear manner, with optimized performance observed at 3 wt% filler loading. Solution viscosities remained within ranges suitable for processing. Structural analyses indicated compatibility between the phases, while morphology changes dependent on filler content were decisive for transport behavior. It is concluded that attapulgite is a promising additive for fine-tuning membrane properties, enabling optimization of the sorption–diffusion balance and improvement of membrane performance in separation applications.

Förderung

  • FAPESQ
  • National Council for Scientific and Technological Development (CNPq) through the Research Productivity Grants (PQ) awarded to researchers Renate Maria Ramos We…
  • Edcleide Maria Araújo
  • Junior Postdoctoral Fellowship (PDJ) granted to Carlos Bruno Barreto Luna
  • LDCM
  • UFCG

Zitieren

APA

Araujo, B. A., Dias, R. A., Silva, P. T. V. D., Paz, R. A. D., Medeiros, V. D. N., Luna, C. B. B., Wellen, R. M. R., Pessan, L. A., & Araújo, E. M. (2026). Polyethersulfone/Attapulgite Membranes Obtained by Solvent Evaporation for Water Vapor Permeation Control. Processes, 14(9), 1475. https://doi.org/10.3390/pr14091475

Vancouver

Araujo BA, Dias RA, Silva PTVD, Paz RAD, Medeiros VDN, Luna CBB, et al. Polyethersulfone/Attapulgite Membranes Obtained by Solvent Evaporation for Water Vapor Permeation Control. Processes. 2026;14(9):1475. doi:10.3390/pr14091475

BibTeX
@article{Araujo2026,
  author = {Araujo, Bruna Aline and Dias, Rafael Agra and Silva, Pamela Thainara Vieira da and Paz, Rene Anisio da and Medeiros, Vanessa da Nobrega and Luna, Carlos Bruno Barreto and Wellen, Renate Maria Ramos and Pessan, Luiz Antônio and Araújo, Edcleide Maria},
  title = {Polyethersulfone/Attapulgite Membranes Obtained by Solvent Evaporation for Water Vapor Permeation Control},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {9},
  pages = {1475},
  doi = {10.3390/pr14091475}
}
Kostenlos starten →