EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Integrated Simulation Model and Weight-on-Bit Control for Autodriller System

Zebing Wu, Zhe Yan, Yaojun Lin, Jian Chen, Yifei Lin, Zihao Zhang, Xiaochun Zhu, Kenan Liu

Processes · 28.04.2026 · 14 (9) · 1423

DOI: 10.3390/pr14091423 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 28.04.2026. Verfasst von Zebing Wu und 7 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xi’an Shiyou University, the “Research on Intelligent Drilling Technology of Winch” project of Sinopec No. 4 Machinery Petroleum Machinery.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In petroleum drilling, conventional automatic drilling systems still rely heavily on manual intervention, which often leads to poor stability, limited multivariable coordination, and large fluctuations in drilling pressure. To address this problem, this study develops a hydraulic drawworks-based autodriller system with integrated power, drive, actuation, and control units, and establishes a mechanical-hydraulic-control co-simulation model for the coordinated regulation of drill-string hoisting speed and surface weight-on-bit (SWOB). Based on this platform, a dual-loop control framework is developed in which the inner loop uses linear active disturbance rejection control (LADRC) for rapid disturbance estimation and compensation, while the outer loop uses PID control for tracking regulation. Feedforward compensation is introduced to handle predictable load variation, and PSO-assisted fuzzy tuning is used to improve adaptability under varying operating conditions. Simulation results show that, compared with conventional cascaded PID control, the proposed controller reduces drawworks speed and SWOB overshoot by 12.5% and 40%, respectively, while the corresponding settling times are shortened by 1.805 s and 2.443 s. Prototype experiments on a scaled test platform further show that the proposed controller can be implemented on physical hardware and can maintain stable real-time regulation under laboratory conditions. These results support the feasibility of the proposed framework for coordinated hydraulic drawworks control under the simulated and laboratory-scale conditions considered in this study.

Förderung

  • Xi’an Shiyou University
  • the “Research on Intelligent Drilling Technology of Winch” project of Sinopec No. 4 Machinery Petroleum Machinery

Zitieren

APA

Wu, Z., Yan, Z., Lin, Y., Chen, J., Lin, Y., Zhang, Z., Zhu, X., & Liu, K. (2026). An Integrated Simulation Model and Weight-on-Bit Control for Autodriller System. Processes, 14(9), 1423. https://doi.org/10.3390/pr14091423

Vancouver

Wu Z, Yan Z, Lin Y, Chen J, Lin Y, Zhang Z, et al. An Integrated Simulation Model and Weight-on-Bit Control for Autodriller System. Processes. 2026;14(9):1423. doi:10.3390/pr14091423

BibTeX
@article{Wu2026,
  author = {Wu, Zebing and Yan, Zhe and Lin, Yaojun and Chen, Jian and Lin, Yifei and Zhang, Zihao and Zhu, Xiaochun and Liu, Kenan},
  title = {An Integrated Simulation Model and Weight-on-Bit Control for Autodriller System},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {9},
  pages = {1423},
  doi = {10.3390/pr14091423}
}
Kostenlos starten →