EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation of Non-Isothermal Two-Phase Flow in a Heterogeneous Shale Porous Medium

Pinghua Shu, Kairui Ye, Chao Qian, Wei Jiang, Chao Xu, Lin Du

Processes · 27.04.2026 · 14 (9) · 1391

DOI: 10.3390/pr14091391 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 27.04.2026. Verfasst von Pinghua Shu und 5 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The characteristics of two-phase flow in heterogeneous shale porous structures are of critical importance for oil and gas extraction and for evaluating the efficiency of underground resource recovery and carbon sequestration. However, although non-isothermal two-phase flow has been investigated in previous studies, systematic research on non-isothermal CO2–crude oil displacement in heterogeneous shale porous structures remains relatively scarce. In this study, a multi-phase simulator was employed to simulate non-isothermal CO2–crude oil displacement in heterogeneous porous structures, and the effects of injection rate, injection temperature, and wettability on two-phase flow characteristics in heterogeneous porous media were systematically analyzed. The results indicate that changes in the viscosity ratio between the displacing and displaced phases—induced by heat transfer—may be a key factor governing immiscible two-phase interfacial dynamics and flow behavior in heterogeneous porous structures. Injection temperature exerts a significant influence on both the main flow channels and local flow pathways within the porous structure; increasing the injection temperature of the displacing phase can effectively enhance displacement efficiency, with the steady-state CO2 saturation increasing from 43.15% to 50.62% as the injection temperature increased from 293.15 K to 363.15 K. In addition, increasing the injection rate improves CO2 sweep efficiency, with the steady-state CO2 saturation increasing from 45.35% to 55.98% as the injection rate increased from 50 to 250 μm/s; however, excessively high injection rates lead to non-piston-like displacement and premature fluid breakthrough, and the CO2 saturation decreased to 49.81% at 350 μm/s. Under strongly water-wet conditions, the CO2 saturation after displacement stabilization is higher.

Zitieren

APA

Shu, P., Ye, K., Qian, C., Jiang, W., Xu, C., & Du, L. (2026). Simulation of Non-Isothermal Two-Phase Flow in a Heterogeneous Shale Porous Medium. Processes, 14(9), 1391. https://doi.org/10.3390/pr14091391

Vancouver

Shu P, Ye K, Qian C, Jiang W, Xu C, Du L. Simulation of Non-Isothermal Two-Phase Flow in a Heterogeneous Shale Porous Medium. Processes. 2026;14(9):1391. doi:10.3390/pr14091391

BibTeX
@article{Shu2026,
  author = {Shu, Pinghua and Ye, Kairui and Qian, Chao and Jiang, Wei and Xu, Chao and Du, Lin},
  title = {Simulation of Non-Isothermal Two-Phase Flow in a Heterogeneous Shale Porous Medium},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {9},
  pages = {1391},
  doi = {10.3390/pr14091391}
}
Kostenlos starten →