EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fracture Propagation Laws in Lamina-Developed Shale Based on the Discrete Element Method

Mingjing Lu, Xuelin Zheng, Dongying Wang, Kang Wang, Feng Yang, Zilin Zhang

Processes · 20.04.2026 · 14 (8) · 1306

DOI: 10.3390/pr14081306 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 20.04.2026. Verfasst von Mingjing Lu und 5 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Oil & Gas Major Project, Natural Science Foundation of Shandong Province, National Natural Science Foundation Project of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Shale oil in continental faulted basins of eastern China, represented by Jiyang Depression, has achieved breakthroughs in productivity. However, challenges such as deep burial, high formation pressure, and poor crude oil mobility pose significant obstacles to achieving high and stable production. Hydraulic fracturing is required to form complex fracture networks for stimulation. Factors such as the lamellar structure of shale, geomechanical conditions, and fracturing operation parameters affect fracture propagation. Therefore, this study establishes a numerical model of fracture propagation in lamina-developed shale using the discrete element software PFC2D 6.0, conducts simulation analysis of fracture propagation laws under in situ stress conditions, and characterizes the influence of lamellar structure and construction technology on fracture complexity. The results show that, for lamina-developed shale, the initiation pressure decreases with increasing injection rate; as the difference between the two horizontal principal stresses increases, hydraulic fractures gradually tend to propagate toward the direction of the maximum principal stress; under high injection pressure, a complex network of short fractures is formed, while, under low injection pressure, the length of the main fracture is prompted to increase. High density (9–10 strips/100 mm) enhances lamina penetration, favoring extension toward maximum horizontal principal stress; low density (4–5 strips/100 mm) strengthens lamina guidance, with fractures propagating along laminae near the injection hole. This research clarifies the mechanisms of fracture initiation and propagation in laminated shale, providing theoretical and technical support for optimizing hydraulic fracturing designs.

Förderung

  • National Oil & Gas Major Project
  • Natural Science Foundation of Shandong Province
  • National Natural Science Foundation Project of China
  • Dongying Science Development Fund
  • Youth Innovation and Technology Support Program for Shandong Provincial Universities
  • Major Special Project for Scientific and Technological Innovation of Dongying City
  • Horizontal Research Projects of Engineering Technology Research Institute, and the Sinopec Shengli Oilfield

Zitieren

APA

Lu, M., Zheng, X., Wang, D., Wang, K., Yang, F., & Zhang, Z. (2026). Fracture Propagation Laws in Lamina-Developed Shale Based on the Discrete Element Method. Processes, 14(8), 1306. https://doi.org/10.3390/pr14081306

Vancouver

Lu M, Zheng X, Wang D, Wang K, Yang F, Zhang Z. Fracture Propagation Laws in Lamina-Developed Shale Based on the Discrete Element Method. Processes. 2026;14(8):1306. doi:10.3390/pr14081306

BibTeX
@article{Lu2026,
  author = {Lu, Mingjing and Zheng, Xuelin and Wang, Dongying and Wang, Kang and Yang, Feng and Zhang, Zilin},
  title = {Fracture Propagation Laws in Lamina-Developed Shale Based on the Discrete Element Method},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {8},
  pages = {1306},
  doi = {10.3390/pr14081306}
}
Kostenlos starten →