EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CFD Simulation on Jet Flow Field Characteristics of CO2 Perforation Fracturing

Zefeng Li, Long Chai, Yining Zhou, Jianping Lan, Mian Zhang, Yuchen Tian, Linghong Tang

Processes · 13.04.2026 · 14 (8) · 1236

DOI: 10.3390/pr14081236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 13.04.2026. Verfasst von Zefeng Li und 6 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Major Project of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During the CO2 fracturing of unconventional oil and gas resources, the structural and operational parameters significantly influence the fracturing effectiveness. To quantitatively reveal the influence mechanisms of key parameters on the CO2 jet flow field through perforations, this study employed computational fluid dynamics (CFD) via Ansys Fluent to simulate and compare the effects of the nozzle contraction angle, injection rate, confining pressure, and fluid temperature. The results indicate that the contraction angles and injection rates have a more significant influence on the jet temperature, pressure, and velocity than the confining pressures and fluid temperatures. As the contraction angle increases, the average velocity of the jet core region increases by 5.0% (with the most significant growth at 35°), and the length of the potential core increases correspondingly. The flow through the perforations is characterized by an instantaneous drop of 2.5 °C in temperature and 2.7 MPa in pressure, then transitions to a regime of temperature recovery and dynamical pressure decay along the fracture. Increasing the fracturing displacement raises the maximum jet velocity to 104.7 m/s (an average increase of 15.5%), extends the potential core length, and amplifies the temperature and pressure drops across the perforation from 1.1 °C and 1.2 MPa to 4.2 °C and 4.8 MPa, respectively. Conversely, higher confining pressure reduces the average jet velocity by 4.3%, shortens the potential core, and diminishes the perforation temperature and pressure drops from 5 °C and 3 MPa to 2 °C and 2.5 MPa. In contrast, elevating the fluid temperature increases the jet velocity by an average of 6.3% but exerts minimal influence on the potential core length; the temperature drop at the perforation remains at approximately 2 °C, while the pressure drop rises from 2.2 MPa to 2.9 MPa. Collectively, both the confining pressure and fluid temperature significantly affect the density and velocity characteristics of the jet. An increase in confining pressure enhances the density of the CO2 jet fluid, which may potentially improve the fracturing impact in actual engineering applications. Quantitatively, the influence of each parameter on the temperature, pressure, and velocity of the CO2 jet is ranked from the most significant to the least as follows: nozzle contraction angle > fracturing injection displacement > formation confining pressure > fluid temperature. The findings of this research have direct implications for practical application, informing the optimization of the fracturing design to achieve greater efficiency and lower risk in CO2 fracturing operations.

Förderung

  • National Science and Technology Major Project of China

Zitieren

APA

Li, Z., Chai, L., Zhou, Y., Lan, J., Zhang, M., Tian, Y., & Tang, L. (2026). CFD Simulation on Jet Flow Field Characteristics of CO2 Perforation Fracturing. Processes, 14(8), 1236. https://doi.org/10.3390/pr14081236

Vancouver

Li Z, Chai L, Zhou Y, Lan J, Zhang M, Tian Y, et al. CFD Simulation on Jet Flow Field Characteristics of CO2 Perforation Fracturing. Processes. 2026;14(8):1236. doi:10.3390/pr14081236

BibTeX
@article{Li2026,
  author = {Li, Zefeng and Chai, Long and Zhou, Yining and Lan, Jianping and Zhang, Mian and Tian, Yuchen and Tang, Linghong},
  title = {CFD Simulation on Jet Flow Field Characteristics of CO2 Perforation Fracturing},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {8},
  pages = {1236},
  doi = {10.3390/pr14081236}
}
Kostenlos starten →