EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modification Effects of High-Pressure Homogenization and Decolorization on Microalgae-Fortified 3D-Printed Foods

Dalne Sinclair, Armin Mirzapour-Kouhdasht, Juan A. Velasquez, Da Chen, Senay Simsek, Jen-Yi Huang

Processes · 10.04.2026 · 14 (8) · 1221

DOI: 10.3390/pr14081221 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 10.04.2026. Verfasst von Dalne Sinclair und 5 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agriculture and Food Research Initiative, U.S. Department of Agriculture's National Institute of Food and Agriculture.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The global transition towards sustainable food systems has intensified the search for alternative protein sources that can meet human nutritional demands with reduced environmental impacts. Although microalgae are rich in protein, their applications in food remain limited due to thick cell walls and intense green color. The aim of this study is to modify Chlorella vulgaris by high-pressure homogenization (HPH) and decolorization to improve its processability for extrusion-based 3D printing. Microalgal biomass was pretreated by HPH at different pressures (10,000, 15,000, 20,000 psi) for one to three passes, followed by pigment removal using ethanol of different concentrations (70, 85, 100%). Microscopic imaging shows that HPH effectively disrupted microalgal cell walls and caused cell disintegration, resulting in increased foaming stability (22–28%) but lower solubility (up to 24%), with other functional properties largely preserved. Ethanol treatments markedly decolored microalgae and increased their water-holding capacity (10–45%) and solubility (6–11%). The formulation of HPH-treated decolorized microalgae with soy protein isolate and xanthan gum increased the viscosity (66–179%) and elasticity (78–235%) of printing inks. The resulting 3D prints show higher hardness (47–128%), springiness (up to 155%) and chewiness (47–408%). The information obtained from this study provides guidance for modifying the functional and rheological properties of microalgae and contributes to advancing the formulation and manufacturing of microalgae-based foods.

Förderung

  • Agriculture and Food Research Initiative
  • U.S. Department of Agriculture's National Institute of Food and Agriculture

Zitieren

APA

Sinclair, D., Mirzapour-Kouhdasht, A., Velasquez, J. A., Chen, D., Simsek, S., & Huang, J. (2026). Modification Effects of High-Pressure Homogenization and Decolorization on Microalgae-Fortified 3D-Printed Foods. Processes, 14(8), 1221. https://doi.org/10.3390/pr14081221

Vancouver

Sinclair D, Mirzapour-Kouhdasht A, Velasquez JA, Chen D, Simsek S, Huang J. Modification Effects of High-Pressure Homogenization and Decolorization on Microalgae-Fortified 3D-Printed Foods. Processes. 2026;14(8):1221. doi:10.3390/pr14081221

BibTeX
@article{Sinclair2026,
  author = {Sinclair, Dalne and Mirzapour-Kouhdasht, Armin and Velasquez, Juan A. and Chen, Da and Simsek, Senay and Huang, Jen-Yi},
  title = {Modification Effects of High-Pressure Homogenization and Decolorization on Microalgae-Fortified 3D-Printed Foods},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {8},
  pages = {1221},
  doi = {10.3390/pr14081221}
}
Kostenlos starten →