EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Industrial-Scale Optimization and Modeling of an Aerated Submerged Ultrafiltration System for Microalgae Dewatering

Giuseppe Gargano, Ainoa Morillas España, Hounaida Kefi, Francisco Gabriel Acién Fernández, Joaquín Pozo-Dengra

Processes · 09.04.2026 · 14 (8) · 1206

DOI: 10.3390/pr14081206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 09.04.2026. Verfasst von Giuseppe Gargano und 4 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission under Horizon Europe, Spanish Ministry of Science and Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microalgae dewatering is a major bottleneck for the industrial deployment of microalgal biorefineries due to its high energy and water requirements. This study investigates the optimization and modeling of an industrial-scale aerated submerged ultrafiltration (UF) system for microalgae pre-concentration under real operating conditions. A submerged hollow-fibre Koch LE8 UF module (348 m2, 0.03 µm) was operated directly on Chlorella sp. cultures produced in an 800 m2 outdoor photobioreactor. Filtration–backwash cycles were experimentally optimized, identifying an optimal sequence of 8.33 min filtration and 1 min backwash, enabling up to 80% net water removal per cycle while maintaining fouling largely reversible under the tested conditions. Long-term trials (6–7 h) achieved stable concentration factors of 3.6–4.3 with complete biomass retention and sustained permeate flux despite increasing solids concentration. Reuse of permeate for backwashing eliminated freshwater consumption without compromising membrane performance. A dynamic resistance-in-series (RIS) model, incorporating mass balances and an empirically derived concentration-polarisation resistance, accurately reproduced permeate flux and biomass concentration dynamics (R2 > 0.83) using a single fitted parameter. The validated model was further applied as a digital twin to simulate operation up to the theoretical concentration factor of 10, quantifying the associated energy and water demands. The system exhibited a low estimated specific energy consumption of 1.25 kWh·kg−1 biomass and a water demand of 0.30 m3·kg−1, demonstrating that aerated submerged UF is a robust, scalable, and energy-efficient solution for industrial microalgae harvesting.

Förderung

  • European Commission under Horizon Europe
  • Spanish Ministry of Science and Innovation

Zitieren

APA

Gargano, G., España, A. M., Kefi, H., Fernández, F. G. A., & Pozo-Dengra, J. (2026). Industrial-Scale Optimization and Modeling of an Aerated Submerged Ultrafiltration System for Microalgae Dewatering. Processes, 14(8), 1206. https://doi.org/10.3390/pr14081206

Vancouver

Gargano G, España AM, Kefi H, Fernández FGA, Pozo-Dengra J. Industrial-Scale Optimization and Modeling of an Aerated Submerged Ultrafiltration System for Microalgae Dewatering. Processes. 2026;14(8):1206. doi:10.3390/pr14081206

BibTeX
@article{Gargano2026,
  author = {Gargano, Giuseppe and España, Ainoa Morillas and Kefi, Hounaida and Fernández, Francisco Gabriel Acién and Pozo-Dengra, Joaquín},
  title = {Industrial-Scale Optimization and Modeling of an Aerated Submerged Ultrafiltration System for Microalgae Dewatering},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {8},
  pages = {1206},
  doi = {10.3390/pr14081206}
}
Kostenlos starten →