EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on Layerwise Expansion of Hydraulic Fractures in Tight Sandstone Reservoirs Controlled by Fractures

Yujie Yan, Quan Zhong, Pandeng Luo, Chunyue Li, Xinfang Ma, Li Liu, Yipeng Wang, He Ma

Processes · 19.03.2026 · 14 (6) · 977

DOI: 10.3390/pr14060977 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 19.03.2026. Verfasst von Yujie Yan und 7 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The bottom water of the Shizhouji Formation tight sandstone reservoir in the Tazhong Shun 9 well area is developed. General fracturing faces the problem of excessive extension of hydraulic fractures and easy communication with water layers. A true triaxial fracturing physical simulation experiment was conducted on the sandstone and mudstone outcrops of the same layer to explore the expansion laws of hydraulic fractures in the tight sandstone reservoir and consider the influence of mudstone interlayers, horizontal stress difference, fracturing fluid flow rate, and viscosity. The mechanism of multi-cluster fractures/artificial fractures penetrating through the layers was revealed. The research results show that the existence of mudstone interlayers greatly increases the complexity of fractures, from 1.88 to 2.96, an increase of 57%. When there is a mudstone interlayer in the rock, the fracturing process is prone to open weak planes, hindering the expansion of hydraulic fractures. The hydraulic fractures of Sample No. 4 were cut off four times and penetrated through the layers once. The larger the flow rate, the greater the complexity of hydraulic fractures, and the easier the fractures penetrate through the layers. The fractures with a large flow rate (200 mL/min) were cut off three times, and the stress difference was larger, the hydraulic fractures tended to be simple, and the penetration through the layers was zero times at a high-level stress difference (18 MPa); the greater the viscosity, the greater the fracture pressure, and the complexity of fractures first increased and then decreased; the greater the viscosity, the more easily the hydraulic fractures penetrate through the layers, with low viscosity cutting off three times, medium viscosity cutting off four times, and high viscosity cutting off five times. Therefore, considering the limitation requirements of the on-site fracturing on the extension of fracture height, it is recommended that the on-site fracturing construction flow rate be 6 m3/min, and the fracturing fluid viscosity be 10 mPa·s.

Zitieren

APA

Yan, Y., Zhong, Q., Luo, P., Li, C., Ma, X., Liu, L., Wang, Y., & Ma, H. (2026). Experimental Study on Layerwise Expansion of Hydraulic Fractures in Tight Sandstone Reservoirs Controlled by Fractures. Processes, 14(6), 977. https://doi.org/10.3390/pr14060977

Vancouver

Yan Y, Zhong Q, Luo P, Li C, Ma X, Liu L, et al. Experimental Study on Layerwise Expansion of Hydraulic Fractures in Tight Sandstone Reservoirs Controlled by Fractures. Processes. 2026;14(6):977. doi:10.3390/pr14060977

BibTeX
@article{Yan2026,
  author = {Yan, Yujie and Zhong, Quan and Luo, Pandeng and Li, Chunyue and Ma, Xinfang and Liu, Li and Wang, Yipeng and Ma, He},
  title = {Experimental Study on Layerwise Expansion of Hydraulic Fractures in Tight Sandstone Reservoirs Controlled by Fractures},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {6},
  pages = {977},
  doi = {10.3390/pr14060977}
}
Kostenlos starten →