Intelligent Optimization of Water Injection in Oil Wells Using an Attention-Enhanced BiLSTM Neural Network
Processes · 17.03.2026 · 14 (6) · 954
DOI: 10.3390/pr14060954 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 17.03.2026. Verfasst von Zhichao Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program Project of the Xinjiang Uygur Autonomous Region, Research Foundation of China University of Petroleum-Beijing at Karamay, Introduction Program for Young Doctors (“Tianchi Talents”) of the Xinjiang Uygur Autonomous Region.
Abstract (Originalsprache)
In China, a majority of the proven crude oil reserves are found in clastic rock reservoirs, which typically exhibit low natural energy levels. Water injection has become the most widely adopted technique for maintaining reservoir pressure and enhancing oil recovery in such formations. However, conventional water injection strategies heavily rely on empirical knowledge, often failing to accurately characterize the dynamic inter-well connectivity between injection and production wells. This limitation hinders the effective management of fluid injection and production processes. To address this challenge, we propose an intelligent optimization method for water allocation in high-water cut, low-permeability reservoirs. Our approach employs a Bidirectional Long Short-Term Memory (BiLSTM) neural network to learn the complex patterns from historical injection data in a data-driven manner. Furthermore, we design a well distance and time joint attention mechanism, which is integrated after the dual BiLSTM layers to enhance the model’s ability to capture the critical dynamic relationships among wells. This mechanism decouples temporal pattern recognition and the spatial physical constraints, laying the foundation for interpretable injection strategy optimization. We name this architecture “AttBiLSTM”, which is designed for optimizing injection strategies for individual layers in separate-layer water injection wells (The layer refers to the basic geological unit or flow unit within a vertically heterogeneous reservoir that is delineated and requires independent water injection regulation). Using field data from the Xinjiang Oilfield, we validate the proposed method and compare its performance against traditional water injection schemes and mainstream data-driven models. The experimental results demonstrate that the AttBiLSTM model effectively establishes a nonlinear mapping between the injection volumes and oil production rates, showing strong performance in both production prediction and injection optimization. An independent numerical reservoir simulation verification confirms that the optimized scheme increases well group oil production by over 3.6%, with no premature water breakthrough risk in a 5-year development cycle. This study provides a novel and practical technical framework for efficiently developing low-porosity, low-permeability, and highly heterogeneous reservoirs.
Förderung
- Key Research and Development Program Project of the Xinjiang Uygur Autonomous Region
- Research Foundation of China University of Petroleum-Beijing at Karamay
- Introduction Program for Young Doctors (“Tianchi Talents”) of the Xinjiang Uygur Autonomous Region
Zitieren
APA
Zhang, Z., Mu, Z., Wang, J., Kang, X., Zhang, P., Tian, S., & Zhou, T. (2026). Intelligent Optimization of Water Injection in Oil Wells Using an Attention-Enhanced BiLSTM Neural Network. Processes, 14(6), 954. https://doi.org/10.3390/pr14060954
Vancouver
Zhang Z, Mu Z, Wang J, Kang X, Zhang P, Tian S, et al. Intelligent Optimization of Water Injection in Oil Wells Using an Attention-Enhanced BiLSTM Neural Network. Processes. 2026;14(6):954. doi:10.3390/pr14060954
BibTeX
@article{Zhang2026,
author = {Zhang, Zhichao and Mu, Zongjie and Wang, Jin and Kang, Xu and Zhang, Panpan and Tian, Shouceng and Zhou, Tianxiang},
title = {Intelligent Optimization of Water Injection in Oil Wells Using an Attention-Enhanced BiLSTM Neural Network},
journal = {Processes},
year = {2026},
volume = {14},
number = {6},
pages = {954},
doi = {10.3390/pr14060954}
}
EUVIMED