Numerical and Experimental Study on Optimizing Key Parameters of a Circulating Fluidized Bed Furnace to Improve the Fluidization Quality of Foundry Waste Sand
Processes · 12.03.2026 · 14 (6) · 907
DOI: 10.3390/pr14060907 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 12.03.2026. Verfasst von Jiwei Zhang und 10 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Department of Guangxi Zhuang Autonomous Region.
Abstract (Originalsprache)
The foundry industry produces over 66 million tons of mixed casting waste sand, containing toxic and harmful substances such as phenols and aldehydes, every year, which has caused serious soil pollution, water source pollution, and large amounts of CO2 emissions. Green resource recycling and utilization are urgently needed. The hot method circulating fluidized bed furnace is currently the mainstream technology for the regeneration of casting waste sand. However, traditional equipment has a series of key technical bottlenecks, such as VOC (volatile organic compound) emissions, low yield of fine sand, poor stability of phase change sand, and uneven fluidization, which directly limit the effectiveness, large-scale promotion, and application of waste sand regeneration. This study, based on a self-designed experimental prototype, constructed models with different hood densities and inlet air velocity parameters. A CFD-DEM coupled model, combined with two turbulence models, was used for numerical simulations and experimental validation, and the optimal combination of fluidization parameters was determined. The study confirmed that the k–ω SST model is more suitable for precise simulation of such gas–solid two-phase flows. The research revealed quantitative relationships between key parameters and sand particle fluidization states, addressing the core problem of uneven fluidization in conventional bubbling furnaces and providing important guidance for the optimized design of new thermal cycle bubbling furnaces. It has significant engineering value for promoting the efficient resource utilization of foundry waste sand and the green and sustainable development of the industry.
Förderung
- Science and Technology Department of Guangxi Zhuang Autonomous Region
Zitieren
APA
Zhang, J., Qin, Z., Wang, N., Luo, G., Ibrahim, A. N. H., Han, Y., Liang, W., Ban, L., Chen, L., Wang, M., & Lu, Y. (2026). Numerical and Experimental Study on Optimizing Key Parameters of a Circulating Fluidized Bed Furnace to Improve the Fluidization Quality of Foundry Waste Sand. Processes, 14(6), 907. https://doi.org/10.3390/pr14060907
Vancouver
Zhang J, Qin Z, Wang N, Luo G, Ibrahim ANH, Han Y, et al. Numerical and Experimental Study on Optimizing Key Parameters of a Circulating Fluidized Bed Furnace to Improve the Fluidization Quality of Foundry Waste Sand. Processes. 2026;14(6):907. doi:10.3390/pr14060907
BibTeX
@article{Zhang2026,
author = {Zhang, Jiwei and Qin, Zuoqin and Wang, Ning and Luo, Guimeng and Ibrahim, Ahmad Nazrul Hakimi and Han, Yiyong and Liang, Wei and Ban, Lu and Chen, Luying and Wang, Mingjia and Lu, Ying},
title = {Numerical and Experimental Study on Optimizing Key Parameters of a Circulating Fluidized Bed Furnace to Improve the Fluidization Quality of Foundry Waste Sand},
journal = {Processes},
year = {2026},
volume = {14},
number = {6},
pages = {907},
doi = {10.3390/pr14060907}
}
EUVIMED