Dynamic Micro-CT Investigation of Pore-Scale Oil–Water Distribution and Residual Oil Evolution During Waterflooding in Heterogeneous Sandstone
Processes · 05.03.2026 · 14 (5) · 845
DOI: 10.3390/pr14050845 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 05.03.2026. Verfasst von Shenghong Chen und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Geological Research Program.
Abstract (Originalsprache)
Despite extensive pore-scale studies on oil–water displacement, quantitative understanding of the dynamic evolution of residual oil morphology and waterflooding efficiency in geologically heterogeneous sandstones remains limited, particularly under large water-injection multiples. To better understand pore-scale oil–water distribution and its influence on enhanced oil recovery, this study utilized Micro-CT combined with SEM-EDS to examine the 3D pore structure and oil–water phase evolution in a heterogeneous sandstone sample from the Xiayang Formation, Wushi Sag, Zhanjiang. Mineralogical analyses reveal that dolomite cementation and vermicular kaolinite infilling introduce strong pore-scale heterogeneity by selectively reducing pore connectivity and permeability, posing challenges for uniform fluid displacement. A 30% KI solution was used to enhance X-ray attenuation of the aqueous phase, enabling clear discrimination between oil and water. Micro-CT reconstructions reveal a relatively uniform pore network dominated by medium-to-large intergranular pores. As the water-injection multiple increases, water progressively invades larger pores, while residual oil is immobilized by capillary forces within micro-throats, forming isolated clusters. The oil-droplet size distribution broadens from a narrow range (50–100 µm) to a wider one (200–300 µm), indicating interfacial destabilization and droplet coalescence. Quantitative analysis indicates that oil saturation decreases from approximately 90% to 36%, while waterflooding efficiency increases rapidly to ~45% at 1 PV and gradually approaches a plateau of ~60% beyond 500–1000 PV. This waterflooding plateau is attributed to capillary trapping and pore-scale connectivity limitations imposed by mineral-induced heterogeneity, which prevent further mobilization of residual oil despite continued water injection. This study advances pore-scale waterflooding research by combining mineralogical heterogeneity with long-term micro-CT imaging, revealing the pore-scale mechanisms controlling residual oil evolution and ultimate waterflooding limits in realistic sandstone.
Förderung
- National Natural Science Foundation of China
- Geological Research Program
Zitieren
APA
Chen, S., Lv, Y., Fang, X., Sun, M., Xin, Y., Li, H., & Liu, W. (2026). Dynamic Micro-CT Investigation of Pore-Scale Oil–Water Distribution and Residual Oil Evolution During Waterflooding in Heterogeneous Sandstone. Processes, 14(5), 845. https://doi.org/10.3390/pr14050845
Vancouver
Chen S, Lv Y, Fang X, Sun M, Xin Y, Li H, et al. Dynamic Micro-CT Investigation of Pore-Scale Oil–Water Distribution and Residual Oil Evolution During Waterflooding in Heterogeneous Sandstone. Processes. 2026;14(5):845. doi:10.3390/pr14050845
BibTeX
@article{Chen2026,
author = {Chen, Shenghong and Lv, Yanxin and Fang, Xiaoyu and Sun, Ming and Xin, Yi and Li, Haibo and Liu, Weiji},
title = {Dynamic Micro-CT Investigation of Pore-Scale Oil–Water Distribution and Residual Oil Evolution During Waterflooding in Heterogeneous Sandstone},
journal = {Processes},
year = {2026},
volume = {14},
number = {5},
pages = {845},
doi = {10.3390/pr14050845}
}
EUVIMED