Fracture Response Characteristics and Rockburst Pressure-Relief Control of Thick and Hard Roofs Under Multi-Parameter Coupled Staged Hydraulic Fracturing
Processes · 05.03.2026 · 14 (5) · 843
DOI: 10.3390/pr14050843 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 05.03.2026. Verfasst von Guowei Dong und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: General Program of the National Natural Science Foundation of China.
Abstract (Originalsprache)
To address the problems of strong roof integrity, severe energy accumulation, and difficult caving in thick and hard roofs, a three-dimensional numerical study on fracture propagation and pressure-relief control durisng segmented hydraulic fracturing was carried out based on the engineering geological conditions of the 6125-1 working face at the Haishiwan Coal Mine, Shaanxi Province, China. using the ABAQUS finite element platform coupled with Ins-coh cohesive elements. A systematic analysis was conducted to elucidate the effects of elastic modulus, Poisson’s ratio, injection rate, and fluid viscosity on fracture initiation, stress evolution, and fractured volume. The results show that for every 10 GPa increase in elastic modulus, the average fractured volume decreases by 8%, and the fracture width exhibits a marked reduction; increasing Poisson’s ratio enhances the lateral deformation compatibility of the rock mass, raising the fracture width and volumetric growth rate by approximately 3% and 5%, respectively, although an excessively high Poisson’s ratio induces stress diffusion and reduces fracture stability. When the injection rate increases from 0.01 m3/s to 0.025 m3/s, the fractured volume increases by about 160%, and the maximum fracture width increases by 43%, whereas increasing fluid viscosity exerts a limited influence on volumetric growth but is conducive to stabilizing fracture morphology. Field observations via borehole imaging and seepage confirm full fracture connectivity within the roof and the formation of a continuous rupture zone, promoting timely roof breakage and caving along the dip direction and thereby creating favorable conditions for reducing rockburst hazards at the working face. This study clarifies the mechanical mechanisms and multi-parameter coupling laws governing hydraulic fracture propagation in thick and hard roofs, providing a theoretical basis and engineering reference for roof pressure-relief control and rockburst-resistant design under similar geological conditions.
Förderung
- General Program of the National Natural Science Foundation of China
Zitieren
APA
Dong, G., Li, D., Ren, X., & Guo, W. (2026). Fracture Response Characteristics and Rockburst Pressure-Relief Control of Thick and Hard Roofs Under Multi-Parameter Coupled Staged Hydraulic Fracturing. Processes, 14(5), 843. https://doi.org/10.3390/pr14050843
Vancouver
Dong G, Li D, Ren X, Guo W. Fracture Response Characteristics and Rockburst Pressure-Relief Control of Thick and Hard Roofs Under Multi-Parameter Coupled Staged Hydraulic Fracturing. Processes. 2026;14(5):843. doi:10.3390/pr14050843
BibTeX
@article{Dong2026,
author = {Dong, Guowei and Li, Dongyang and Ren, Xiaoliang and Guo, Weibin},
title = {Fracture Response Characteristics and Rockburst Pressure-Relief Control of Thick and Hard Roofs Under Multi-Parameter Coupled Staged Hydraulic Fracturing},
journal = {Processes},
year = {2026},
volume = {14},
number = {5},
pages = {843},
doi = {10.3390/pr14050843}
}
EUVIMED