Fracture-Controlled Mechanisms of Sand Production in Deep Tight Sandstone: Insights from Coupled FDEM Modeling
Processes · 28.02.2026 · 14 (5) · 801
DOI: 10.3390/pr14050801 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 28.02.2026. Verfasst von Bao Zhang und 7 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: R&D Center of Ultra-Deep Complex Oil and Gas Reservoir Exploration and Development, CNPC, China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Wellbore instability and sand production pose critical challenges in deep tight sandstone reservoirs, severely impairing wellbore integrity and reducing hydrocarbon recovery. This study introduces, for the first time, the combined finite–discrete element method (FDEM) to numerically simulate sand production under high in situ stress. The FDEM By seamlessly integrates continuum and discontinuum representations within a unified framework, enabling the simulation of the complete failure sequence—from matrix damage and fracture growth to granular flow. High-resolution numerical simulations are conducted to compare intact and naturally fractured formations, with a focus on the governing role of pre-existing geological discontinuities. Results show that in intact sandstone, stress concentration drives helical crack growth leading to a symmetrical V-shaped breakout, with a critical borehole pressure (CBHP) of 60.05 MPa required to prevent instability. In fractured rock, however, pre-existing fractures act as dominant weakness planes that distort the stress field and induce earlier, asymmetric failure, raising the CBHP to 64.05 MPa. A strong negative linear correlation is observed between reservoir pressure depletion and CBHP: a pore-pressure reduction of 23.75 MPa decreases the CBHP by 4.8–5.0 MPa. Notably, natural fractures amplify the destabilizing effect of depletion, raising the required CBHP by 4.0 MPa at initial reservoir pressure (95 MPa) and by 5.0 MPa under full depletion. Consequently, although fractured formations require a higher CBHP (64.05 MPa vs. 60.05 MPa), their safe operating window is effectively narrower. These findings advance the mechanistic understanding of fracture-controlled sand production and provide a validated numerical framework for determining safe production pressures in deep, fractured sandstone reservoirs.
Förderung
- R&D Center of Ultra-Deep Complex Oil and Gas Reservoir Exploration and Development, CNPC, China
- National Natural Science Foundation of China
Zitieren
APA
Zhang, B., Wei, J., Bai, X., Ye, R., Shen, J., Huang, S., Dong, C., & Huang, F. (2026). Fracture-Controlled Mechanisms of Sand Production in Deep Tight Sandstone: Insights from Coupled FDEM Modeling. Processes, 14(5), 801. https://doi.org/10.3390/pr14050801
Vancouver
Zhang B, Wei J, Bai X, Ye R, Shen J, Huang S, et al. Fracture-Controlled Mechanisms of Sand Production in Deep Tight Sandstone: Insights from Coupled FDEM Modeling. Processes. 2026;14(5):801. doi:10.3390/pr14050801
BibTeX
@article{Zhang2026,
author = {Zhang, Bao and Wei, Junhui and Bai, Xiaofei and Ye, Rongjun and Shen, Jianxin and Huang, Shicai and Dong, Changyin and Huang, Fansheng},
title = {Fracture-Controlled Mechanisms of Sand Production in Deep Tight Sandstone: Insights from Coupled FDEM Modeling},
journal = {Processes},
year = {2026},
volume = {14},
number = {5},
pages = {801},
doi = {10.3390/pr14050801}
}
EUVIMED