Modeling the Conditions for Stabilizing Aqueous Phase Evaporation in Highly Stable Water-Hydrocarbon Emulsions Under Mechanical Turbulence to Suppress Unstable Phase Transfer and Reduce Accident Risks
Processes · 17.02.2026 · 14 (4) · 678
DOI: 10.3390/pr14040678 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 17.02.2026. Verfasst von Aliya Gabdelfayazovna Safiulina und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Vast quantities of liquid hydrocarbon and oil-containing wastes are generated and accumulate annually. Dewatering such sludges presents a significant technological challenge due to the high content of emulsified and chemically bound water. Consequently, the development of integrated approaches, particularly thermomechanical methods, have emerged as a promising strategy. These methods aim to disrupt the emulsion stability and enhance water evaporation efficiency. This study provides a theoretical basis for stabilizing the evaporation of the aqueous phase through mechanical agitation within boiling emulsions. A quantitative mathematical model is developed to identify critical conditions that prevent explosive boiling. Under intensive mixing, water globule diameters decrease by 80–85% within the first 5 s, while their settling time exceeds the dispersion time by hundreds of times—effectively inhibiting the accumulation of a critical aqueous-phase mass. Energy analysis reveals that, at a superheat temperature of 110 °C, the maximum permissible droplet diameter is approximately 0.5 mm; at 150 °C, it must not exceed 0.25 mm to avoid explosive boiling. To ensure safe operation, mixer rotational speeds of at least 100–200 rpm are required, with higher speeds (>200 rpm) necessary near 150 °C. The mechanical agitation modes proposed herein enable controlled, non-explosive evaporation of water from complex emulsions. Collectively, these findings lay a theoretical foundation for the industrial-scale deployment of thermomechanical dewatering technologies—offering a safer, more efficient pathway for managing challenging sludge streams.
Zitieren
APA
Safiulina, A. G., & Khusnutdinov, I. S. (2026). Modeling the Conditions for Stabilizing Aqueous Phase Evaporation in Highly Stable Water-Hydrocarbon Emulsions Under Mechanical Turbulence to Suppress Unstable Phase Transfer and Reduce Accident Risks. Processes, 14(4), 678. https://doi.org/10.3390/pr14040678
Vancouver
Safiulina AG, Khusnutdinov IS. Modeling the Conditions for Stabilizing Aqueous Phase Evaporation in Highly Stable Water-Hydrocarbon Emulsions Under Mechanical Turbulence to Suppress Unstable Phase Transfer and Reduce Accident Risks. Processes. 2026;14(4):678. doi:10.3390/pr14040678
BibTeX
@article{Safiulina2026,
author = {Safiulina, Aliya Gabdelfayazovna and Khusnutdinov, Ismagil Shakirovich},
title = {Modeling the Conditions for Stabilizing Aqueous Phase Evaporation in Highly Stable Water-Hydrocarbon Emulsions Under Mechanical Turbulence to Suppress Unstable Phase Transfer and Reduce Accident Risks},
journal = {Processes},
year = {2026},
volume = {14},
number = {4},
pages = {678},
doi = {10.3390/pr14040678}
}
EUVIMED