EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Different Impeller Types on Mixing Efficiency in Mechanically Stirred Tanks with Tubular Baffles

Jesús Eduardo Lugo Hinojosa, Juan Antonio Yáñez Varela, Alejandro Alonzo García, Gabriela Rivadeneyra Romero, Sergio Alejandro Martínez Delgadillo

Processes · 08.01.2026 · 14 (2) · 225

DOI: 10.3390/pr14020225 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 08.01.2026. Verfasst von Jesús Eduardo Lugo Hinojosa und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient mixing in stirred tanks is essential for chemical and biochemical processes. Tubular baffles offer potential energy savings and multifunctionality (e.g., as heat exchangers); however, their interaction with common impeller types is not well understood. This study uses computational fluid dynamics (CFD) simulations to evaluate the hydrodynamic performance of a novel tubular baffle design compared to conventional flat baffles with three impellers: a Rushton turbine (RT), a pitched blade turbine (PBT), and a hydrofoil (HE3). Dimensionless analysis (power number, NP; and pumping number, NQ), flow visualization, and vorticity dynamics were employed. The results show that, by attenuating large-scale recirculation, tubular baffles reduce power consumption by 64%, 13%, and 23% for the HE3, PBT, and RT, respectively. However, the HE3 impeller experienced a 30% decrease in pumping capacity, which confined the flow to the lower tank. The PBT showed a 10% increase in NQ and intensified bottom circulation. The RT uniquely generated distributed, high-intensity turbulence along the baffle height while maintaining its characteristic dual-loop structure. The analysis critiques the local pumping efficiency metric and advocates for a global flow assessment. The HE3 is optimal for efficient bulk blending at low power; the PBT is optimal for strong bottom circulation processes; and the RT is optimal for applications requiring enhanced interfacial processes, where baffles serve a dual function. This work provides a framework for selecting energy-efficient agitation systems by coupling impeller performance with global tank hydrodynamics.

Zitieren

APA

Hinojosa, J. E. L., Varela, J. A. Y., García, A. A., Romero, G. R., & Delgadillo, S. A. M. (2026). Effect of Different Impeller Types on Mixing Efficiency in Mechanically Stirred Tanks with Tubular Baffles. Processes, 14(2), 225. https://doi.org/10.3390/pr14020225

Vancouver

Hinojosa JEL, Varela JAY, García AA, Romero GR, Delgadillo SAM. Effect of Different Impeller Types on Mixing Efficiency in Mechanically Stirred Tanks with Tubular Baffles. Processes. 2026;14(2):225. doi:10.3390/pr14020225

BibTeX
@article{Hinojosa2026,
  author = {Hinojosa, Jesús Eduardo Lugo and Varela, Juan Antonio Yáñez and García, Alejandro Alonzo and Romero, Gabriela Rivadeneyra and Delgadillo, Sergio Alejandro Martínez},
  title = {Effect of Different Impeller Types on Mixing Efficiency in Mechanically Stirred Tanks with Tubular Baffles},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {2},
  pages = {225},
  doi = {10.3390/pr14020225}
}
Kostenlos starten →