EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanism and Parameter Optimization of Surfactant-Assisted CO2 Huff-n-Puff for Enhanced Oil Recovery in Tight Conglomerate Reservoirs

Ming Li, Jigang Zhang, Meng Ning, Yong Zhao, Guoshan Zhang, Jiaxing Liu, Mingjian Wang, Lei Li

Processes · 02.12.2025 · 13 (12) · 3888

DOI: 10.3390/pr13123888 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 02.12.2025. Verfasst von Ming Li und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Provincial Universities Youth Innovation and Technology Support Program, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

China possesses abundant tight conglomerate oil resources. However, these reservoirs are typically characterized by low porosity and permeability, high clay mineral content, and complex pore structures, resulting in poor performance of conventional waterflooding development. Challenges including insufficient energy replenishment and high flow resistance ultimately lead to low oil recovery factors. This study systematically investigates surfactant-assisted CO2 huff-n-puff (SA-CO2-HnP) for enhanced oil recovery in tight conglomerate reservoirs. For a tight conglomerate reservoir in a Xinjiang block, a fully implicit, multiphase, multicomponent dual-porosity numerical model was established. By integrating pore–throat distributions acquired through high-pressure mercury intrusion with a self-developed MATLAB PVT package, nanoconfinement-induced shifts in the phase envelope were rigorously embedded into the simulation framework. The calibrated model was subsequently employed to conduct a comprehensive sensitivity analysis, quantitatively delineating the influence of petrophysical, completion, and operational variables on production performance. Simulation results demonstrate that compared to conventional CO2 huff-n-puff, the addition of surfactants increases the cumulative recovery factor by 3.5 percentage points over a 20-year production period. The enhancement mechanisms primarily include reducing CO2–oil interfacial tension (IFT) and minimum miscibility pressure (MMP), improving reservoir wettability, and promoting CO2 dissolution and diffusion in crude oil. Sensitivity analysis reveals that injection duration, injection pressure, and injection rate significantly influence recovery efficiency, while soaking time exhibits relatively limited impact. Moreover, an optimal surfactant concentration (0.0003 mole fraction) exists; excessive concentrations lead to diminished enhancement effects due to competitive adsorption and pore blockage. This study demonstrates that SA-CO2-HnP technology offers favorable economic viability and operational feasibility, providing theoretical foundation and parameter optimization guidance for efficient tight conglomerate oil reservoir development.

Förderung

  • Shandong Provincial Universities Youth Innovation and Technology Support Program
  • National Key Research and Development Program of China

Zitieren

APA

Li, M., Zhang, J., Ning, M., Zhao, Y., Zhang, G., Liu, J., Wang, M., & Li, L. (2025). Mechanism and Parameter Optimization of Surfactant-Assisted CO2 Huff-n-Puff for Enhanced Oil Recovery in Tight Conglomerate Reservoirs. Processes, 13(12), 3888. https://doi.org/10.3390/pr13123888

Vancouver

Li M, Zhang J, Ning M, Zhao Y, Zhang G, Liu J, et al. Mechanism and Parameter Optimization of Surfactant-Assisted CO2 Huff-n-Puff for Enhanced Oil Recovery in Tight Conglomerate Reservoirs. Processes. 2025;13(12):3888. doi:10.3390/pr13123888

BibTeX
@article{Li2025,
  author = {Li, Ming and Zhang, Jigang and Ning, Meng and Zhao, Yong and Zhang, Guoshan and Liu, Jiaxing and Wang, Mingjian and Li, Lei},
  title = {Mechanism and Parameter Optimization of Surfactant-Assisted CO2 Huff-n-Puff for Enhanced Oil Recovery in Tight Conglomerate Reservoirs},
  journal = {Processes},
  year = {2025},
  volume = {13},
  number = {12},
  pages = {3888},
  doi = {10.3390/pr13123888}
}
Kostenlos starten →