EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Study on a PV/T Using Microchannel Heat Pipe

Hu Huang, Hao Fu, Huashan Li, Chenghang Pan, Zongyu Sun, Xiao Ren

Processes · 23.10.2025 · 13 (11) · 3402

DOI: 10.3390/pr13113402 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 23.10.2025. Verfasst von Hu Huang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Changqing Engineering Design Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photovoltaic/Thermal (PV/T) technology efficiently harnesses solar energy by co-generating electricity and hot water. Unlike conventional PV systems, PV/T systems improve thermal utilization, cool PV modules, and prevent performance degradation caused by high temperatures. Among the various PV/T configurations, micro-channel heat pipe (MCHP) systems are prominent due to their ability to enhance heat transfer through the use of vacuum-filled, refrigerant-sealed MCHPs. This study explores how factors such as working fluid type, evaporation section heat flux, fill ratio, and condensation section length impact system performance. A 3D steady-state CFD model simulating phase-change heat transfer was developed to analyze thermal and electrical efficiencies. The results reveal that R134a outperforms acetone in heat transfer, with thermal resistance showing a significant decrease (from 0.5 °C·W−1 at a 30% fill rate to 0.3 °C·W−1 at a 70% fill rate) under varying heat source powers. The optimal fill ratio depends on the heat flux; for powers up to 70 W, the fill ratio ranges from 30% to 50%, while above 70 W, it shifts to 60–80%. Additionally, a longer condensation section reduces thermal resistance by up to 30% and enhances heat transfer efficiency, improving the overall system performance by 10%. These findings offer valuable insights into optimizing MCHP PV/T systems for increased efficiency.

Förderung

  • Changqing Engineering Design Co., Ltd.

Zitieren

APA

Huang, H., Fu, H., Li, H., Pan, C., Sun, Z., & Ren, X. (2025). Numerical Study on a PV/T Using Microchannel Heat Pipe. Processes, 13(11), 3402. https://doi.org/10.3390/pr13113402

Vancouver

Huang H, Fu H, Li H, Pan C, Sun Z, Ren X. Numerical Study on a PV/T Using Microchannel Heat Pipe. Processes. 2025;13(11):3402. doi:10.3390/pr13113402

BibTeX
@article{Huang2025,
  author = {Huang, Hu and Fu, Hao and Li, Huashan and Pan, Chenghang and Sun, Zongyu and Ren, Xiao},
  title = {Numerical Study on a PV/T Using Microchannel Heat Pipe},
  journal = {Processes},
  year = {2025},
  volume = {13},
  number = {11},
  pages = {3402},
  doi = {10.3390/pr13113402}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche