Fabrication of Spinel-Type H4Ti5O12 Ion Sieve for Lithium Recovery from Aqueous Resources: Adsorption Performance and Mechanism
Processes · 18.09.2025 · 13 (9) · 2981
DOI: 10.3390/pr13092981 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 18.09.2025. Verfasst von Weiwei Ma und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Qingchuang Science and Technology Program of Shandong Province, China.
Abstract (Originalsprache)
Lithium (Li) ion sieve is considered to have great potential in the selective extraction of Li+ from complex Li+-containing brine owing to its cost-effectiveness, excellent adsorption performance, and environmental friendliness. Nevertheless, the defects of complex regulation and control of technological parameters in the preparation process of Li ion sieve and poor recycling efficiency limit its application. In this study, spinel-type H4Ti5O12 ion sieves (HTO) were successfully prepared through a high-temperature solid-state method for recovering Li+ from aqueous resources. Through the experiment of optimizing the key preparation process parameters of HTO, it was found that the optimum preparation conditions were as follows: lithium ion source of CH3COOLi‧H2O, calcination temperature of 800 °C, and acid (HCl) washing concentration of 0.3 mol/L. The uptake of Li+ by HTO aligned with the pseudo-second-order kinetic model, which was a chemical adsorption process controlled by reversible Li–H ion exchange reaction. HTO exhibited extremely high regeneration cycle characteristics, and after five cycles, it retained 96.06% of its initial adsorption capacity. The present work highlighted that spinel-type HTO has high industrial application potential in the field of Li+ recovery from oilfield brine.
Förderung
- National Key Research and Development Program of China
- Qingchuang Science and Technology Program of Shandong Province, China
Zitieren
APA
Ma, W., Huang, H., Zhu, G., Wang, X., Kong, Q., & Shi, X. (2025). Fabrication of Spinel-Type H4Ti5O12 Ion Sieve for Lithium Recovery from Aqueous Resources: Adsorption Performance and Mechanism. Processes, 13(9), 2981. https://doi.org/10.3390/pr13092981
Vancouver
Ma W, Huang H, Zhu G, Wang X, Kong Q, Shi X. Fabrication of Spinel-Type H4Ti5O12 Ion Sieve for Lithium Recovery from Aqueous Resources: Adsorption Performance and Mechanism. Processes. 2025;13(9):2981. doi:10.3390/pr13092981
BibTeX
@article{Ma2025,
author = {Ma, Weiwei and Huang, Hongrong and Zhu, Guangjin and Wang, Xueqing and Kong, Qiaoping and Shi, Xueqing},
title = {Fabrication of Spinel-Type H4Ti5O12 Ion Sieve for Lithium Recovery from Aqueous Resources: Adsorption Performance and Mechanism},
journal = {Processes},
year = {2025},
volume = {13},
number = {9},
pages = {2981},
doi = {10.3390/pr13092981}
}
EUVIMED