EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Internal Flow and Pressure Pulsation Characteristics of a High-Head Francis Turbine Under Wide Load Conditions

Yufan Xiong, Zhenming Lai, Xiaobing Liu, Xin Deng, Jiayang Pang

Processes · 15.09.2025 · 13 (9) · 2939

DOI: 10.3390/pr13092939 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 15.09.2025. Verfasst von Yufan Xiong und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Yangtze Power Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To accommodate the integration of emerging energy sources such as wind and solar power, hydroelectric units are increasingly required to operate across a broader range of conditions. This operational expansion often leads to elevated pressure pulsations within turbines under non-design conditions, resulting in intensified hydraulic vibrations and, in some cases, structural damage and overall stability concerns. In this study, the Shear Stress Transport (SST) k-ω turbulence model is employed to perform unsteady numerical simulation calculation of a Francis-99 mixed-flow model turbine operating at a head of 400 m. Simulations are conducted for three operating regimes: low-flow and low-load conditions, optimal conditions, and high-flow and high-load conditions. Internal flow in the full flow channel of the turbine and pressure pulsation in the full flow channel components is systematically analyzed. The findings indicate that under low-flow and low-load conditions, the ability of the runner blades to constrain the water flow is significantly decreased. Across all three operational scenarios, the dominant pressure pulsation frequencies observed in both the stationary and guide vane are 30fn, primarily influenced by dynamic and static disturbance caused by the rotation of the runner’s long and short blades. In low-flow and low-load conditions, a low-frequency component at 0.2fn, due to the existence of vortices in the draft tube, exhibits the highest amplitude—up to 0.6%—in the straight cone section. Within the runner, pressure pulsation frequencies are predominantly associated with the rotation of the guide vane. Conversely, the draft tube region is characterized by frequency components related to both the runner’s dynamic-static interaction at 30fn and vortex-induced pulsations at 0.2fn.

Förderung

  • China Yangtze Power Co., Ltd.

Zitieren

APA

Xiong, Y., Lai, Z., Liu, X., Deng, X., & Pang, J. (2025). Internal Flow and Pressure Pulsation Characteristics of a High-Head Francis Turbine Under Wide Load Conditions. Processes, 13(9), 2939. https://doi.org/10.3390/pr13092939

Vancouver

Xiong Y, Lai Z, Liu X, Deng X, Pang J. Internal Flow and Pressure Pulsation Characteristics of a High-Head Francis Turbine Under Wide Load Conditions. Processes. 2025;13(9):2939. doi:10.3390/pr13092939

BibTeX
@article{Xiong2025,
  author = {Xiong, Yufan and Lai, Zhenming and Liu, Xiaobing and Deng, Xin and Pang, Jiayang},
  title = {Internal Flow and Pressure Pulsation Characteristics of a High-Head Francis Turbine Under Wide Load Conditions},
  journal = {Processes},
  year = {2025},
  volume = {13},
  number = {9},
  pages = {2939},
  doi = {10.3390/pr13092939}
}
Kostenlos starten →