EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Welding of Metal–Polymer–Metal Composites: Enhancing Energy Control

Serguei P. Murzin, Heinz Palkowski

Processes · 29.08.2025 · 13 (9) · 2774

DOI: 10.3390/pr13092774 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 29.08.2025. Verfasst von Serguei P. Murzin und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates two-sided pulsed-periodic laser welding of three-layer metal–polymer–metal (MPM) composite sheets composed of galvanized dual-phase steel (DPK 30/50+ZE) as outer layers and a polypropylene–polyethylene (PP–PE) core. Welding was performed using a Rofin StarWeld Performance pulsed Nd:YAG laser with controlled parameters: pulse energy (30–32 J), duration (6–8 ms), and frequency (up to 1 Hz). High-quality welds were achieved with penetration depths reaching 70% of the outer metal layer thickness and minimal defects. Microscopic analysis revealed distinct fusion and heat-affected zones (HAZ) with no evidence of cracks or porosity, indicating stable thermal conditions. Mechanical testing showed that the welded joints attained a tensile strength of approximately 470 MPa, about 80% of the ultimate tensile strength of the base metal, with an average elongation of 0.6 mm. These results confirm the structural integrity of the joints. The observed weld morphology and microstructural features suggest that thermal conditions during welding significantly affect joint quality and HAZ formation. The study demonstrates that strong, defect-free joints can be produced using basic beam-shaping optics and outlines a pathway for further improvement through the integration of diffractive optical elements (DOEs) to enhance spatial-energy control in multilayer structures.

Zitieren

APA

Murzin, S. P., & Palkowski, H. (2025). Laser Welding of Metal–Polymer–Metal Composites: Enhancing Energy Control. Processes, 13(9), 2774. https://doi.org/10.3390/pr13092774

Vancouver

Murzin SP, Palkowski H. Laser Welding of Metal–Polymer–Metal Composites: Enhancing Energy Control. Processes. 2025;13(9):2774. doi:10.3390/pr13092774

BibTeX
@article{Murzin2025,
  author = {Murzin, Serguei P. and Palkowski, Heinz},
  title = {Laser Welding of Metal–Polymer–Metal Composites: Enhancing Energy Control},
  journal = {Processes},
  year = {2025},
  volume = {13},
  number = {9},
  pages = {2774},
  doi = {10.3390/pr13092774}
}
Kostenlos starten →