Modification of Bitumen with Mechanochemically Devulcanized Crumb Rubber
Processes · 07.08.2025 · 13 (8) · 2489
DOI: 10.3390/pr13082489 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 07.08.2025. Verfasst von Anar Akkenzheyeva und 8 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
This study investigates the modification of bitumen using mechanochemically devulcanized crumb rubber. The objective of this research is to enhance the performance characteristics of bituminous binders while addressing the inherent limitations associated with conventional crumb rubber (CCR), such as insufficient dispersion, elevated viscosity, and phase instability. Preliminary chemical activation of the crumb rubber was performed using a planetary ball mill, followed by thermomechanical devulcanization on a two-roll open mixing mill. Structural features of the devulcanized crumb rubber were analyzed using infrared spectroscopy, which confirmed the breakdown of S–S bonds. This study presents a comparative analysis of the performance characteristics of rubber–bitumen binders produced using both conventional rubber crumb (CRC) and devulcanized rubber crumb (DRC). The use of DCR, obtained mechanochemically from rubber waste, improved penetration, Fraass breaking point and the ring and ball softening point on average at high concentrations (20; 25% crumb rubber) compared to conventional crumb rubber by 33%, 66% and 2.4%, respectively. Optical microscopy revealed the formation of a uniform mesh-like rubber structure within the bitumen matrix, which contributes to enhanced performance characteristics of the modified binder and improved mechanical strength of the material. The key contribution of this work lies in the development and experimental validation of an efficient approach to deep devulcanization of crumb rubber via mechanochemical activation using readily available nitrogen-containing reagents. Furthermore, the study establishes a direct correlation between the degree of devulcanization, the dispersion quality of rubber particles within the bitumen matrix, and the resultant performance characteristics of the modified binder.
Förderung
- Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Akkenzheyeva, A., Bussurmanova, A., Yensegenova, U., Haritonovs, V., Meri, R. M., Imanbayev, Y., Ayapbergenov, Y., Sydykov, S., & Murzabekov, A. (2025). Modification of Bitumen with Mechanochemically Devulcanized Crumb Rubber. Processes, 13(8), 2489. https://doi.org/10.3390/pr13082489
Vancouver
Akkenzheyeva A, Bussurmanova A, Yensegenova U, Haritonovs V, Meri RM, Imanbayev Y, et al. Modification of Bitumen with Mechanochemically Devulcanized Crumb Rubber. Processes. 2025;13(8):2489. doi:10.3390/pr13082489
BibTeX
@article{Akkenzheyeva2025,
author = {Akkenzheyeva, Anar and Bussurmanova, Akkenzhe and Yensegenova, Uzilkhan and Haritonovs, Viktors and Meri, Remo Merijs and Imanbayev, Yerzhan and Ayapbergenov, Yerbolat and Sydykov, Serik and Murzabekov, Aibar},
title = {Modification of Bitumen with Mechanochemically Devulcanized Crumb Rubber},
journal = {Processes},
year = {2025},
volume = {13},
number = {8},
pages = {2489},
doi = {10.3390/pr13082489}
}
EUVIMED