Ventilated Facades for Low-Carbon Buildings: A Review
Processes · 17.07.2025 · 13 (7) · 2275
DOI: 10.3390/pr13072275 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 17.07.2025. Verfasst von Pinar Mert Cuce und 1 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 165 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The construction sector presently consumes about 40% of global energy and generates 36% of CO2 emissions, making facade retrofits a priority for decarbonising buildings. This review clarifies how ventilated facades (VFs), wall assemblies that interpose a ventilated air cavity between outer cladding and the insulated structure, address that challenge. First, the paper categorises VFs by structural configuration, ventilation strategy and functional control into four principal families: double-skin, rainscreen, hybrid/adaptive and active–passive systems, with further extensions such as BIPV, PCM and green-wall integrations that couple energy generation or storage with envelope performance. Heat-transfer analysis shows that the cavity interrupts conductive paths, promotes buoyancy- or wind-driven convection, and curtails radiative exchange. Key design parameters, including cavity depth, vent-area ratio, airflow velocity and surface emissivity, govern this balance, while hybrid ventilation offers the most excellent peak-load mitigation with modest energy input. A synthesis of simulation and field studies indicates that properly detailed VFs reduce envelope cooling loads by 20–55% across diverse climates and cut winter heating demand by 10–20% when vents are seasonally managed or coupled with heat-recovery devices. These thermal benefits translate into steadier interior surface temperatures, lower radiant asymmetry and fewer drafts, thereby expanding the hours occupants remain within comfort bands without mechanical conditioning. Climate-responsive guidance emerges in tropical and arid regions, favouring highly ventilated, low-absorptance cladding; temperate and continental zones gain from adaptive vents, movable insulation or PCM layers; multi-skin adaptive facades promise balanced year-round savings by re-configuring in real time. Overall, the review demonstrates that VFs constitute a versatile, passive-plus platform for low-carbon buildings, simultaneously enhancing energy efficiency, durability and indoor comfort. Future advances in smart controls, bio-based materials and integrated energy-recovery systems are poised to unlock further performance gains and accelerate the sector’s transition to net-zero. Emerging multifunctional materials such as phase-change composites, nanostructured coatings, and perovskite-integrated systems also show promise in enhancing facade adaptability and energy responsiveness.
Zitieren
APA
Cuce, P. M., & Cuce, E. (2025). Ventilated Facades for Low-Carbon Buildings: A Review. Processes, 13(7), 2275. https://doi.org/10.3390/pr13072275
Vancouver
Cuce PM, Cuce E. Ventilated Facades for Low-Carbon Buildings: A Review. Processes. 2025;13(7):2275. doi:10.3390/pr13072275
BibTeX
@article{Cuce2025,
author = {Cuce, Pinar Mert and Cuce, Erdem},
title = {Ventilated Facades for Low-Carbon Buildings: A Review},
journal = {Processes},
year = {2025},
volume = {13},
number = {7},
pages = {2275},
doi = {10.3390/pr13072275}
}
EUVIMED