EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surrogate Modeling of Hydrogen-Enriched Combustion Using Autoencoder-Based Dimensionality Reduction

Lanfei Zhang, Xu Chu, Siyu Ding, Mingshuo Zhou, Chenxu Ni, Xingjian Wang

Processes · 05.04.2025 · 13 (4) · 1093

DOI: 10.3390/pr13041093 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 05.04.2025. Verfasst von Lanfei Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Creative Seed Fund of the Shanxi Research Institute for Clean Energy, NO. 703 Research Institute of China State Shipbuilding Company, National Key Laboratory of Aerospace Liquid Propulsion.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Deep learning-based surrogate models have received wide attention for efficient and cost-effective predictions of fluid flows and combustion, while their hyperparameter settings often lack generalizable guidelines. This study examines two different types of surrogate models, convolutional autoencoder (CAE)-based reduced order models (ROMs) and fully connected autoencoder (FCAE)-based ROMs, for emulating hydrogen-enriched combustion from a triple-coaxial nozzle jet. The performances of these ROMs are discussed in detail, with an emphasis on key hyperparameters, including the number of network layers in the encoder (l), latent vector dimensionality (dim), and convolutional stride (s). The results indicate that a larger l is essential for capturing features in strongly nonlinear flowfields, whereas a smaller l is more effective for less nonlinear distributions, as additional layers may cause overfitting. Specifically, when employing CAE-based ROMs to predict the spatial distribution for H2 (XH2) with weak nonlinearity, the reconstruction absolute average relative deviation (AARD) from the two-layer model was marginally higher than that of three- and four-layer models, whereas the prediction AARD was approximately 5% lower. A smaller dim yields better performance in weakly nonlinear flowfields but may increase local errors in some cases due to excessive feature compression. A CAE-based ROM with a dim = 10 achieved a notably lower AARD of 4.01% for XH2 prediction. A smaller s may enhance the spatial resolution yet raise computational costs. Under identical hyperparameters, the CAE-based ROM outperformed the FCAE-based ROM in both cost-effectiveness and accuracy, achieving a 35 times faster training speed and lower absolute average relative deviation in prediction. These findings provide important guidelines for hyperparameter selection in training autoencoder (AE)-based ROMs for hydrogen-enriched combustion and other similar engineering design problems.

Förderung

  • Creative Seed Fund of the Shanxi Research Institute for Clean Energy
  • NO. 703 Research Institute of China State Shipbuilding Company
  • National Key Laboratory of Aerospace Liquid Propulsion

Zitieren

APA

Zhang, L., Chu, X., Ding, S., Zhou, M., Ni, C., & Wang, X. (2025). Surrogate Modeling of Hydrogen-Enriched Combustion Using Autoencoder-Based Dimensionality Reduction. Processes, 13(4), 1093. https://doi.org/10.3390/pr13041093

Vancouver

Zhang L, Chu X, Ding S, Zhou M, Ni C, Wang X. Surrogate Modeling of Hydrogen-Enriched Combustion Using Autoencoder-Based Dimensionality Reduction. Processes. 2025;13(4):1093. doi:10.3390/pr13041093

BibTeX
@article{Zhang2025,
  author = {Zhang, Lanfei and Chu, Xu and Ding, Siyu and Zhou, Mingshuo and Ni, Chenxu and Wang, Xingjian},
  title = {Surrogate Modeling of Hydrogen-Enriched Combustion Using Autoencoder-Based Dimensionality Reduction},
  journal = {Processes},
  year = {2025},
  volume = {13},
  number = {4},
  pages = {1093},
  doi = {10.3390/pr13041093}
}
Kostenlos starten →