EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Recycling of Crosslinked High-Density Polyethylene (xHDPE)

Hibal Ahmad, Denis Rodrigue

Processes · 10.03.2025 · 13 (3) · 809

DOI: 10.3390/pr13030809 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 10.03.2025. Verfasst von Hibal Ahmad und 1 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Association of Rotational Molders (ARM), via the Crawford Education and Development Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces a mechanical recycling technique for crosslinked high-density polyethylene (xHDPE) using cryogenic pulverization and compression molding. This method is shown to effectively transform xHDPE into valuable fillers for recycled HDPE (rHDPE(B)) sourced from recycled bottles using different concentrations (15–60%) and particle sizes (0–250 µm, 250–500 µm, and 500–1000 µm). In particular, the recycling method significantly reduced the gel content from 60.5% to 41.8% for the 0–250 µm particles, indicating partial decrosslinking. Morphological analysis revealed good interfacial adhesion between rHDPE(B) and recycled xHDPE (r-xHDPE), improving the overall performance and resulting in a balanced combination of properties from both materials. The r-xHDPE samples exhibited improved thermal stability. While particle size had minimal effect on material properties, increasing its concentration significantly improved impact strength (612%) with a slight (3%) reduction in density at 60% 500–1000 µm particles. This research underscores the possibility of recycling crosslinked polymers and highlights the need for further studies to optimize the material properties and expand the methodology to a wider range of polymers.

Förderung

  • Association of Rotational Molders (ARM), via the Crawford Education and Development Foundation

Zitieren

APA

Ahmad, H., & Rodrigue, D. (2025). Mechanical Recycling of Crosslinked High-Density Polyethylene (xHDPE). Processes, 13(3), 809. https://doi.org/10.3390/pr13030809

Vancouver

Ahmad H, Rodrigue D. Mechanical Recycling of Crosslinked High-Density Polyethylene (xHDPE). Processes. 2025;13(3):809. doi:10.3390/pr13030809

BibTeX
@article{Ahmad2025,
  author = {Ahmad, Hibal and Rodrigue, Denis},
  title = {Mechanical Recycling of Crosslinked High-Density Polyethylene (xHDPE)},
  journal = {Processes},
  year = {2025},
  volume = {13},
  number = {3},
  pages = {809},
  doi = {10.3390/pr13030809}
}
Kostenlos starten →