EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prevention Against Decrease in the Cooling Efficiency at the Car Engine by Applying Compressed Air to the External Heat Exchange Surfaces of the Car Cooler

Marek Lipnický, Zuzana Brodnianská, Stanislav Kotšmíd, Pavel Beňo

Processes · 19.02.2025 · 13 (2) · 582

DOI: 10.3390/pr13020582 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 19.02.2025. Verfasst von Marek Lipnický und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EU NextGenerationEU through the Recovery and Resilience Plan for Slovakia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper is aimed at preventing the reduction of automotive cooler cooling efficiency in order to prevent engine failure by overheating. At the same time, fouling of the external surfaces of the cooler can be prevented in this process. For this purpose, a system of 12 air pressure nozzles placed inline and staggered in front of the cooler at a distance of 60 mm to 170 mm was designed and investigated. This type of cooling of the external heat exchange surfaces of automotive coolers is new and has not yet been studied. To investigate the effect of the air nozzles on the coolant cooling time, the inlet and outlet temperatures of the cooler were compared when the nozzles and the cooler fan and a separate cooler fan were operating. In addition, the effect of forced air on the cooler generated by an external fan at velocities of 6, 8, and 10 m/s was investigated as a simulation of driving a vehicle. Cooling of the G12+ coolant by the external fan caused a gradual decrease in the outlet temperature of the coolant as the air velocity increased. The system of air pressure nozzles in combination with the cooler fan caused an improvement in the cooling process compared to a single cooler fan. The inline and staggered nozzle arrangements with the cooler fan achieved a decrease in the outlet temperature of 0.76 to 1.02 times and 0.78 to 1.03 times compared to cooling by the single cooler fan, respectively. The arrangement and varying the distance of the nozzles from the cooler had no significant effect on decreasing the coolant outlet and inlet temperatures. The air pressure nozzle system covers the complete surface of the cooler with airflow and encircles the tubes and fins more efficiently, leading to more intense heat dissipation while cooling the coolant. The designed system can be applied in automobiles and equipment demanding intense cooling of operating fluids by means of coolers.

Förderung

  • EU NextGenerationEU through the Recovery and Resilience Plan for Slovakia

Zitieren

APA

Lipnický, M., Brodnianská, Z., Kotšmíd, S., & Beňo, P. (2025). Prevention Against Decrease in the Cooling Efficiency at the Car Engine by Applying Compressed Air to the External Heat Exchange Surfaces of the Car Cooler. Processes, 13(2), 582. https://doi.org/10.3390/pr13020582

Vancouver

Lipnický M, Brodnianská Z, Kotšmíd S, Beňo P. Prevention Against Decrease in the Cooling Efficiency at the Car Engine by Applying Compressed Air to the External Heat Exchange Surfaces of the Car Cooler. Processes. 2025;13(2):582. doi:10.3390/pr13020582

BibTeX
@article{Lipnick2025,
  author = {Lipnický, Marek and Brodnianská, Zuzana and Kotšmíd, Stanislav and Beňo, Pavel},
  title = {Prevention Against Decrease in the Cooling Efficiency at the Car Engine by Applying Compressed Air to the External Heat Exchange Surfaces of the Car Cooler},
  journal = {Processes},
  year = {2025},
  volume = {13},
  number = {2},
  pages = {582},
  doi = {10.3390/pr13020582}
}
Kostenlos starten →