Physical Modeling of High-Pressure Flooding and Development of Oil Displacement Agent for Carbonate Fracture-Vuggy Reservoir
Processes · 01.01.2025 · 13 (1) · 71
DOI: 10.3390/pr13010071 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 01.01.2025. Verfasst von Jinghui Li und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: “Thirteenth Five-Year Plan” major national projects.
Abstract (Originalsprache)
The fracture-cavity carbonate reservoir in Tahe oilfield is buried deep (more than 5000 m). The reservoir has low permeability, strong heterogeneity, large size, diverse forms of connectivity, and complex spatial distribution. In conventional water flooding, it is difficult to improve oil recovery effectively because of small water flood sweep and large injection pressure. Pressure flooding is a new water injection technique that can change the reservoir pore space. Combined with an oil displacement agent, pressure flooding is expected to improve the recovery rate of carbonate reservoirs. In this paper, the influence factors of pressure flooding technology are studied, and a set of surfactant systems suitable for high-temperature and high-salt reservoirs is developed. The results show that only an appropriate injection flow can produce microfractures. Only an appropriate displacement rate can optimize the effects of pressure flooding. With an increase in crude oil viscosity, the recovery rate after pressure flooding decreases gradually. A complex fracture network is formed in reservoirs after pressure flooding. The new surfactant system has good interfacial tension reduction properties and excellent stability. Pressure flooding experiments with the addition of a surfactant showed that the system can help to improve the recovery of pressure flooding.
Förderung
- “Thirteenth Five-Year Plan” major national projects
Zitieren
APA
Li, J., Zhang, W., Qu, B., Zhen, E., Qian, Z., Ma, S., Qin, F., & You, Q. (2025). Physical Modeling of High-Pressure Flooding and Development of Oil Displacement Agent for Carbonate Fracture-Vuggy Reservoir. Processes, 13(1), 71. https://doi.org/10.3390/pr13010071
Vancouver
Li J, Zhang W, Qu B, Zhen E, Qian Z, Ma S, et al. Physical Modeling of High-Pressure Flooding and Development of Oil Displacement Agent for Carbonate Fracture-Vuggy Reservoir. Processes. 2025;13(1):71. doi:10.3390/pr13010071
BibTeX
@article{Li2025,
author = {Li, Jinghui and Zhang, Wen and Qu, Bochao and Zhen, Enlong and Qian, Zhen and Ma, Shufen and Qin, Fei and You, Qing},
title = {Physical Modeling of High-Pressure Flooding and Development of Oil Displacement Agent for Carbonate Fracture-Vuggy Reservoir},
journal = {Processes},
year = {2025},
volume = {13},
number = {1},
pages = {71},
doi = {10.3390/pr13010071}
}
EUVIMED