EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Co-Gasification of Plastic Waste Blended with Biomass: Process Modeling and Multi-Objective Optimization

Tanawat Aentung, Yaneeporn Patcharavorachot, Wei Wu

Processes · 05.09.2024 · 12 (9) · 1906

DOI: 10.3390/pr12091906 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 05.09.2024. Verfasst von Tanawat Aentung und 2 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Taiwan, King Mongkut’s Institute of Technology, Ladkrabang.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mixed plastic/biomass co-gasification stands out as a promising and environmentally friendly technology, since it reduces wide solid wastes and produces green hydrogen. High-quality syngas can be obtained by virtue of the process design and optimization of a downdraft fixed-bed co-gasifier. The design is based on the actual reaction zones within a real gasifier to ensure accurate results. The methodology shows that (i) the co-gasifier modeling is validated using the adiabatic RGibbs model in Aspen Plus, (ii) the performance of the co-gasifier is evaluated using cold-gas efficiency (CGE) and carbon conversion efficiency (CCE) as indicators, and (iii) the multi-objective optimization (MOO) is employed to optimize these indicators simultaneously, utilizing a standard genetic algorithm (GA) combined with response surface methodology (RSM) to identify the Pareto frontier. The optimal conditions, resulting in a CGE of 91.78% and a CCE of 83.77% at a gasifier temperature of 967.89 °C, a steam-to-feed ratio of 1.40, and a plastic-to-biomass ratio of 74.23%, were identified using the technique for order of preference by similarity to ideal solution (TOPSIS). The inclusion of plastics enhances gasifier performance and syngas quality, leading to significant improvements in CGE and CCE values.

Förderung

  • National Science and Technology Council, Taiwan
  • King Mongkut’s Institute of Technology, Ladkrabang

Zitieren

APA

Aentung, T., Patcharavorachot, Y., & Wu, W. (2024). Co-Gasification of Plastic Waste Blended with Biomass: Process Modeling and Multi-Objective Optimization. Processes, 12(9), 1906. https://doi.org/10.3390/pr12091906

Vancouver

Aentung T, Patcharavorachot Y, Wu W. Co-Gasification of Plastic Waste Blended with Biomass: Process Modeling and Multi-Objective Optimization. Processes. 2024;12(9):1906. doi:10.3390/pr12091906

BibTeX
@article{Aentung2024,
  author = {Aentung, Tanawat and Patcharavorachot, Yaneeporn and Wu, Wei},
  title = {Co-Gasification of Plastic Waste Blended with Biomass: Process Modeling and Multi-Objective Optimization},
  journal = {Processes},
  year = {2024},
  volume = {12},
  number = {9},
  pages = {1906},
  doi = {10.3390/pr12091906}
}
Kostenlos starten →