Effects of Autogenous Gas Tungsten Arc Welding (GTAW) on Corrosion Resistance of Stainless Steel 316L
Processes · 20.08.2024 · 12 (8) · 1757
DOI: 10.3390/pr12081757 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 20.08.2024. Verfasst von Inyoung Song und 8 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Machinery and Materials, LIG NEX1.
Abstract (Originalsprache)
The autogenous manual gas tungsten arc welding (GTAW) process was used for cladding austenitic stainless steel 316L using a single pass with various contact tip-to-work distances (CTWDs). Immersion and electrochemical tests were used to evaluate the corrosion resistance of the welded specimens, and a microstructural analysis was conducted to investigate the chemical composition of the molten pool and the heat-affected zone of welding. The key findings of this study indicate that the corrosion resistance improved under a CTWD of 5 mm due to the optimal distribution of ferrite and a refined microstructure. Additionally, the highest hardness was observed in specimens with a CTWD of 3 mm, attributed to the increased ferrite content in the weld metal. As the CTWD increased, the ferrite fraction decreased, and the hardness also diminished. However, in the CTWD 7 mm case, the higher heat input influenced the microstructure and molten pool shape significantly through the Marangoni effect, resulting in a lower corrosion resistance. These results suggest that optimizing the CTWD can enhance the corrosion resistance of welded 316L stainless steel.
Förderung
- Korea Institute of Machinery and Materials
- LIG NEX1
Zitieren
APA
Song, I., Jeong, G., Kim, S., Kim, Y. H., Murphy, A. B., Park, T., Kim, D., Park, H., & Cho, D. (2024). Effects of Autogenous Gas Tungsten Arc Welding (GTAW) on Corrosion Resistance of Stainless Steel 316L. Processes, 12(8), 1757. https://doi.org/10.3390/pr12081757
Vancouver
Song I, Jeong G, Kim S, Kim YH, Murphy AB, Park T, et al. Effects of Autogenous Gas Tungsten Arc Welding (GTAW) on Corrosion Resistance of Stainless Steel 316L. Processes. 2024;12(8):1757. doi:10.3390/pr12081757
BibTeX
@article{Song2024,
author = {Song, Inyoung and Jeong, Gwang-Ho and Kim, Sang-Kyo and Kim, Yun Hwan and Murphy, Anthony B. and Park, Tae-Kook and Kim, Ducklae and Park, Hyunwoo and Cho, Dae-Won},
title = {Effects of Autogenous Gas Tungsten Arc Welding (GTAW) on Corrosion Resistance of Stainless Steel 316L},
journal = {Processes},
year = {2024},
volume = {12},
number = {8},
pages = {1757},
doi = {10.3390/pr12081757}
}
EUVIMED