Effect of Nozzle Quantity on the Flow Field Characteristics and Grinding Efficiency in a Steam Jet Mill
Processes · 17.07.2024 · 12 (7) · 1500
DOI: 10.3390/pr12071500 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 17.07.2024. Verfasst von Shenglong Huang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China.
Abstract (Originalsprache)
A steam jet mill (SJM), which employs industrial waste heat steam as a gas source, is a widely utilized apparatus for the pulverization of fly ash. To achieve elevated single-machine grinding capacity, efficiency improvement research based on structural optimization should be conducted. In this study, numerical simulations and industrial experiments are carried out on SJMs equipped with three and six nozzles (hereinafter referred to as N3 and N6, respectively) to study the influence of nozzle quantity on the flow field and grinding efficiency. The numerical simulation results indicate that, under the N3 structure, particles can achieve a higher impact velocity in the comminution area and improve the kinetic energy of a single impact. In the conveying area, the airflow diffusion is better, resulting in an upward flow field that is more uniform. The classification area shows an increase in the uniformity of the flow field and a significant reduction in the local vortex structure, which is beneficial for accurate particle classification. In the interim, industrial experiments demonstrate that the N3 structure can markedly enhance the processing capacity and energy efficiency of the system. The smaller the feed particle size, the more pronounced the efficiency improvement.
Förderung
- Natural Science Foundation of China
Zitieren
APA
Huang, S., Zhang, Y., Yin, X., Zhang, M., Li, H., Wang, Z., Chen, H., & Wang, H. (2024). Effect of Nozzle Quantity on the Flow Field Characteristics and Grinding Efficiency in a Steam Jet Mill. Processes, 12(7), 1500. https://doi.org/10.3390/pr12071500
Vancouver
Huang S, Zhang Y, Yin X, Zhang M, Li H, Wang Z, et al. Effect of Nozzle Quantity on the Flow Field Characteristics and Grinding Efficiency in a Steam Jet Mill. Processes. 2024;12(7):1500. doi:10.3390/pr12071500
BibTeX
@article{Huang2024,
author = {Huang, Shenglong and Zhang, Yulu and Yin, Xixi and Zhang, Mingxing and Li, Hong and Wang, Zhe and Chen, Haiyan and Wang, Huan},
title = {Effect of Nozzle Quantity on the Flow Field Characteristics and Grinding Efficiency in a Steam Jet Mill},
journal = {Processes},
year = {2024},
volume = {12},
number = {7},
pages = {1500},
doi = {10.3390/pr12071500}
}
EUVIMED