High-Performance Porous pSi/Ag@C Anode for Lithium-Ion Batteries
Processes · 17.05.2024 · 12 (5) · 1021
DOI: 10.3390/pr12051021 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 17.05.2024. Verfasst von Kefan Li und 7 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Taizhou Science and Technology Bureau, Department of Human Resources and Social Security of Jiangsu Province, Jiangsu University.
Abstract (Originalsprache)
Silicon represents one of the most attractive anode materials in lithium-ion batteries (LIBs) due to its highest theoretical specific capacity. Thus, there is a most urgent need to prepare Si-based nano materials in a very efficient way and develop some reasonable approaches for their modification in order to resolve the short-falls of Si anodes, which include both low conductivity and huge volume changes during intercalation of lithium ions. In this work, the kerf loss silicon (KL Si) from the photovoltaic industry has been used as an inexpensive Si source for the preparation of a porous silicon/silver/carbon composite (pSi/Ag@C) as an anode material. Porous silicon was embedded with Ag particles via the Ag-catalyzed chemical etching process, providing additional space to accommodate the large volume expansion of silicon. After carbon coating from polymerization of tannic acid on the surface of pSi/Ag, a high-speed conductive network over the surface of silicon was built and contributed to enhancing the electrochemical performance of the anode. The pSi/Ag@C electrode discharge capacity maintained at a stable value of 665.3 mAh g−1 after 100 cycles under 0.5 A g−1 and exhibited good rate performance. Therefore, this study recommends that the method is very promising for producing a silicon anode material for LIBs from KL Si.
Förderung
- Taizhou Science and Technology Bureau
- Department of Human Resources and Social Security of Jiangsu Province
- Jiangsu University
Zitieren
APA
Li, K., Li, X., Yuan, L., Han, Z., Li, M., Ji, R., Zhan, Y., & Tang, K. (2024). High-Performance Porous pSi/Ag@C Anode for Lithium-Ion Batteries. Processes, 12(5), 1021. https://doi.org/10.3390/pr12051021
Vancouver
Li K, Li X, Yuan L, Han Z, Li M, Ji R, et al. High-Performance Porous pSi/Ag@C Anode for Lithium-Ion Batteries. Processes. 2024;12(5):1021. doi:10.3390/pr12051021
BibTeX
@article{Li2024,
author = {Li, Kefan and Li, Xiang and Yuan, Liang and Han, Zewen and Li, Mengkui and Ji, Rui and Zhan, Yixin and Tang, Kai},
title = {High-Performance Porous pSi/Ag@C Anode for Lithium-Ion Batteries},
journal = {Processes},
year = {2024},
volume = {12},
number = {5},
pages = {1021},
doi = {10.3390/pr12051021}
}
EUVIMED