EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Predicting Alloying Element Yield in Converter Steelmaking Using t-SNE-WOA-LSTM

Xin Liu, Xihui Qu, Xinjun Xie, Sijun Li, Yanping Bao, Lihua Zhao

Processes · 10.05.2024 · 12 (5) · 974

DOI: 10.3390/pr12050974 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 10.05.2024. Verfasst von Xin Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance and quality of steel products are significantly impacted by the alloying element control. The efficiency of alloy utilization in the steelmaking process was directly related to element yield. This study analyses the factors that influence the yield of elements in the steelmaking process using correlation analysis. A yield prediction model was developed using a t-distributed stochastic neighbor embedding (t-SNE) algorithm, a whale optimization algorithm (WOA), and a long short-term memory (LSTM) neural network. The t-SNE algorithm was used to reduce the dimensionality of the original data, while the WOA optimization algorithm was employed to optimize the hyperparameters of the LSTM neural network. The t-SNE-WOA-LSTM model accurately predicted the yield of Mn and Si elements with hit rates of 71.67%, 96.67%, and 99.17% and 57.50%, 89.17%, and 97.50%, respectively, falling within the error range of ±1%, ±2%, and ±3% for Mn and ±1%, ±3%, and ±5% for Si. The results demonstrate that the t-SNE-WOA-LSTM model outperforms the backpropagation (BP), LSTM, and WOA-LSTM models in terms of prediction accuracy. The model was applied to actual production in a Chinese plant. The actual performance of the industrial application is within a ±3% error range, with an accuracy of 100%. Furthermore, the elemental yield predicted by the model and then added the ferroalloys resulted in a reduction in the elemental content of the product by 0.017%. The model enables accurate prediction of alloying element yields and was effectively applied in industrial production.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, X., Qu, X., Xie, X., Li, S., Bao, Y., & Zhao, L. (2024). Predicting Alloying Element Yield in Converter Steelmaking Using t-SNE-WOA-LSTM. Processes, 12(5), 974. https://doi.org/10.3390/pr12050974

Vancouver

Liu X, Qu X, Xie X, Li S, Bao Y, Zhao L. Predicting Alloying Element Yield in Converter Steelmaking Using t-SNE-WOA-LSTM. Processes. 2024;12(5):974. doi:10.3390/pr12050974

BibTeX
@article{Liu2024,
  author = {Liu, Xin and Qu, Xihui and Xie, Xinjun and Li, Sijun and Bao, Yanping and Zhao, Lihua},
  title = {Predicting Alloying Element Yield in Converter Steelmaking Using t-SNE-WOA-LSTM},
  journal = {Processes},
  year = {2024},
  volume = {12},
  number = {5},
  pages = {974},
  doi = {10.3390/pr12050974}
}
Kostenlos starten →