Parametric Energy Efficiency Impact Analysis for Industrial Process Heating Furnaces Using the Manufacturing Energy Assessment Software for Utility Reduction
Processes · 04.04.2024 · 12 (4) · 737
DOI: 10.3390/pr12040737 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 04.04.2024. Verfasst von Prakash Singh Bisht und 4 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Industrial process heating furnace operations consume considerable energy in the U.S. manufacturing sector, making it crucial to identify energy efficient strategies due to the growing need to minimize energy usage and emissions. It is important to identify the potential impact of these factors to enable process engineers to operate process heating systems at the maximum possible efficiency. This study examines and identifies the key impact factors that influence the efficiency of process heating systems using MEASUR (v1.4.0), the DOE software tools such as the insulation effectiveness, the burner stoichiometry, cooling medium, thermal storage, and atmospheric gases. Data from a two-fuel-fired heat treatment furnace and an electric arc furnace (EAF) for steelmaking were employed to establish the baseline heat balance models in MEASUR. The fractional factorial design experiment was developed with two-level parameter values and energy efficiency strategies for the heat input into industrial furnaces. The three most significant parameters for the heat input for a fuel-fired industrial furnace, Industrial Furnace A, are excess air percentage or the oxygen percentage in flue gas (OF), average surface temperature (ST), and combustion air temperature (CT). Similarly, for an electric industrial furnace, Industrial Furnace B, the parameters are charge temperature (CHT), average surface temperature (ST), and time open (TO). A comparative analysis was carried out for the fuel-fired and equivalent electric resistance furnaces to identify the prospect of electrification of industrial furnaces relying upon fossil fuels. The study aims to assist industries and designers in making informed decisions regarding industrial furnace upgrades, process optimization, and maintenance investments, resulting in substantial energy and cost savings, and a reduced environmental impact.
Zitieren
APA
Bisht, P. S., Gopalakrishnan, B., Dahal, R., Li, H., & Liu, Z. (2024). Parametric Energy Efficiency Impact Analysis for Industrial Process Heating Furnaces Using the Manufacturing Energy Assessment Software for Utility Reduction. Processes, 12(4), 737. https://doi.org/10.3390/pr12040737
Vancouver
Bisht PS, Gopalakrishnan B, Dahal R, Li H, Liu Z. Parametric Energy Efficiency Impact Analysis for Industrial Process Heating Furnaces Using the Manufacturing Energy Assessment Software for Utility Reduction. Processes. 2024;12(4):737. doi:10.3390/pr12040737
BibTeX
@article{Bisht2024,
author = {Bisht, Prakash Singh and Gopalakrishnan, Bhaskaran and Dahal, Rupesh and Li, Hailin and Liu, Zhichao},
title = {Parametric Energy Efficiency Impact Analysis for Industrial Process Heating Furnaces Using the Manufacturing Energy Assessment Software for Utility Reduction},
journal = {Processes},
year = {2024},
volume = {12},
number = {4},
pages = {737},
doi = {10.3390/pr12040737}
}
EUVIMED