A Novel Approach to Optimizing Grinding Parameters in the Parallel Grinding Process
Processes · 28.02.2024 · 12 (3) · 493
DOI: 10.3390/pr12030493 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 28.02.2024. Verfasst von Tengfei Yin und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, International Science and Technology Cooperation Project of Guangzhou Development District/Huangpu District, State Key Laboratories in Hong Kong from the Innovation and Technology Commission (ITC) of the Government of the Hong Kong Special Administrative Region (HKSAR….
Abstract (Originalsprache)
Hard materials have found extensive applications in the fields of electronics, optics, and semiconductors. Parallel grinding is a common method for fabricating high-quality surfaces on hard materials with high efficiency. However, the surface generation mechanism has not been fully understood, resulting in a lack of an optimization approach for parallel grinding. In this study, the surface profile formation processes were analyzed under different grinding conditions. Then, a novel method was proposed to improve surface finish in parallel grinding, and grinding experiments were carried out to validate the proposed approach. It was found that the denominator (b) of the simplest form of the rotational speed ratio of the grinding wheel to the workpiece has a great influence on surface generation. The surface finish can be optimized without sacrificing the machining efficiency by slightly adjusting the rotational speeds of the wheel or the workpiece to make the value of b close to the ratio (p) of the wheel contact width to the cross-feed distance per workpiece revolution. Overall, this study provides a novel approach for optimizing the parallel grinding process, which can be applied to industrial applications.
Förderung
- National Key Research and Development Program of China
- International Science and Technology Cooperation Project of Guangzhou Development District/Huangpu District
- State Key Laboratories in Hong Kong from the Innovation and Technology Commission (ITC) of the Government of the Hong Kong Special Administrative Region (HKSAR…
- Research Committee of The Hong Kong Polytechnic University
Zitieren
APA
Yin, T., Zhang, H., Hang, W., & To, S. (2024). A Novel Approach to Optimizing Grinding Parameters in the Parallel Grinding Process. Processes, 12(3), 493. https://doi.org/10.3390/pr12030493
Vancouver
Yin T, Zhang H, Hang W, To S. A Novel Approach to Optimizing Grinding Parameters in the Parallel Grinding Process. Processes. 2024;12(3):493. doi:10.3390/pr12030493
BibTeX
@article{Yin2024,
author = {Yin, Tengfei and Zhang, Hanqian and Hang, Wei and To, Suet},
title = {A Novel Approach to Optimizing Grinding Parameters in the Parallel Grinding Process},
journal = {Processes},
year = {2024},
volume = {12},
number = {3},
pages = {493},
doi = {10.3390/pr12030493}
}
EUVIMED