Mechanical Recycling of Post-Industrial PC/ABS Blends from the Automotive Sector by Mixture Design
Processes · 07.02.2024 · 12 (2) · 349
DOI: 10.3390/pr12020349 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 07.02.2024. Verfasst von Silvia Zanatta und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: LaPrima Plastics.
Abstract (Originalsprache)
The widespread use of plastic materials poses significant environmental challenges, which have promoted a growing call for a circular approach to such materials, emphasizing waste reintegration into production. From this perspective, the present study focuses on analyzing a post-industrial recycled stream of chrome-plated automotive scraps composed of acrylonitrile–butadiene–styrene (ABS), polycarbonate (PC), and a commercial PC/ABS blend. The batch-to-batch varying proportions of these constituents make control of the recycled materials’ quality challenging. To address this problem, we formulated an I-optimal mixture design model using the infrared absorbance ratio of selected peaks and Izod impact resistance results for injection-molded samples as inputs to determine the composition of each batch quickly. The two model equations (adjusted R2 > 0.97) obtained, based on cubic expression and regressed from data obtained from 27 mixtures with known compositions, were combined into a single system for the determination of unknown batch compositions. The validation test showed that the models can satisfactorily predict both the infrared and Izod results of blends with known compositions, but in the latter case, the results are less reliable, probably due to specific blend morphological interactions according to specific compositions. The results can improve mechanical recycling methodologies for reintroducing plastic wastes to the market.
Förderung
- LaPrima Plastics
Zitieren
APA
Zanatta, S., Boaretti, C., Lago, E. D., Scopel, L., Penzo, D., & Modesti, M. (2024). Mechanical Recycling of Post-Industrial PC/ABS Blends from the Automotive Sector by Mixture Design. Processes, 12(2), 349. https://doi.org/10.3390/pr12020349
Vancouver
Zanatta S, Boaretti C, Lago ED, Scopel L, Penzo D, Modesti M. Mechanical Recycling of Post-Industrial PC/ABS Blends from the Automotive Sector by Mixture Design. Processes. 2024;12(2):349. doi:10.3390/pr12020349
BibTeX
@article{Zanatta2024,
author = {Zanatta, Silvia and Boaretti, Carlo and Lago, Eleonora Dal and Scopel, Luca and Penzo, Diego and Modesti, Michele},
title = {Mechanical Recycling of Post-Industrial PC/ABS Blends from the Automotive Sector by Mixture Design},
journal = {Processes},
year = {2024},
volume = {12},
number = {2},
pages = {349},
doi = {10.3390/pr12020349}
}
EUVIMED