Numerical Simulation Study of Pressure-Driven Water Injection and Optimization Development Schemes for Low-Permeability Reservoirs in the G Block of Daqing Oilfield
Processes · 19.12.2023 · 12 (1) · 1
DOI: 10.3390/pr12010001 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 19.12.2023. Verfasst von Biao Wang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, New Era Longjiang Outstanding Master’s and Doctoral Thesis Project, Key Laboratory of Enhanced Oil and Gas Recovery, Ministry of Education.
Abstract (Originalsprache)
Pressure-driven water injection technology shows significant potential in addressing the key challenges of low-permeability oil reservoirs, improving water flooding development efficiency. Grounded in FDEM theory, this study establishes fluid matrix constitutive equations and employs FDEM to resolve rock stress–strain fields. A numerical simulation method for pressure-driven water injection in low-permeability reservoirs is developed to study the impact of different well pattern densities. The results indicate that the 90° horizontal well pattern using the five-spot method yields optimal outcomes, with approximately 32.32% higher cumulative liquid production than vertical well patterns. The 45° horizontal well pattern with the reversed nine-spot method also performs well, with about 30% higher cumulative liquid production than single-row vertical wells. Pressure-driven water injection improves matrix oil–water permeability and expands water flooding coverage. Based on the pressure gradient distribution driven by different well patterns, an evaluation method for the inter-well utilization capacity and its effectiveness was established. This method quantitatively assesses the reservoir depletion under various horizontal well encryption schemes. For research on timing of water injection in pressure-driven water flooding. Compared to pressure-driven water injection after 90 days, there is increased cumulative oil production after 40 days, emphasizing the importance of early pressure maintenance for higher cumulative oil production and enhanced recovery rates in low-permeability reservoir development. These findings provide crucial theoretical and practical support.
Förderung
- National Natural Science Foundation of China
- New Era Longjiang Outstanding Master’s and Doctoral Thesis Project
- Key Laboratory of Enhanced Oil and Gas Recovery, Ministry of Education
- Heilongjiang Province
Zitieren
APA
Wang, B., Zhao, Y., Tian, Y., Kong, C., Ye, Q., Zhao, S., Li, Z., & Suo, Y. (2023). Numerical Simulation Study of Pressure-Driven Water Injection and Optimization Development Schemes for Low-Permeability Reservoirs in the G Block of Daqing Oilfield. Processes, 12(1), 1. https://doi.org/10.3390/pr12010001
Vancouver
Wang B, Zhao Y, Tian Y, Kong C, Ye Q, Zhao S, et al. Numerical Simulation Study of Pressure-Driven Water Injection and Optimization Development Schemes for Low-Permeability Reservoirs in the G Block of Daqing Oilfield. Processes. 2023;12(1):1. doi:10.3390/pr12010001
BibTeX
@article{Wang2023,
author = {Wang, Biao and Zhao, Yanjie and Tian, Yajie and Kong, Cuilong and Ye, Qinyou and Zhao, Sicong and Li, Zihao and Suo, Yu},
title = {Numerical Simulation Study of Pressure-Driven Water Injection and Optimization Development Schemes for Low-Permeability Reservoirs in the G Block of Daqing Oilfield},
journal = {Processes},
year = {2023},
volume = {12},
number = {1},
pages = {1},
doi = {10.3390/pr12010001}
}
EUVIMED