EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wear Detection of Extruder Elements Based on Current Signature by Means of a Continuous Wavelet Transform

Marek Danielak, Kamil Witaszek, Adam Ekielski, Tomasz Żelaziński, Alla Dudnyk, Karol Durczak

Processes · 17.11.2023 · 11 (11) · 3240

DOI: 10.3390/pr11113240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 17.11.2023. Verfasst von Marek Danielak und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Assessing the wear of components in a single-screw extruder and its condition during the process is difficult. In this context, wavelet analysis was used to investigate the wear condition of extruder elements, which yielded data on current waveforms obtained from 1 kHz frequency converters. To date, no tests of this type have been conducted on single-screw food extruders, which further emphasizes the relevance of the research undertaken by the authors. Experimental tests have been conducted to verify the hypothesis that it is possible to assess the level of wear of the working elements of an extruder by monitoring the variations in the frequencies on the current spectrum using wavelet analysis tools. The root mean square (RMS) values of the current were compared for two configurations of the working elements of the device, i.e., new and used. Observation of the frequency variations of the current spectrum values using wavelet analysis tools can provide valuable information on the technical condition of the working elements of an industrial extruder. Therefore, they can indicate the need for prompt replacement of friction elements in order to improve the efficiency and performance of the machine.

Zitieren

APA

Danielak, M., Witaszek, K., Ekielski, A., Żelaziński, T., Dudnyk, A., & Durczak, K. (2023). Wear Detection of Extruder Elements Based on Current Signature by Means of a Continuous Wavelet Transform. Processes, 11(11), 3240. https://doi.org/10.3390/pr11113240

Vancouver

Danielak M, Witaszek K, Ekielski A, Żelaziński T, Dudnyk A, Durczak K. Wear Detection of Extruder Elements Based on Current Signature by Means of a Continuous Wavelet Transform. Processes. 2023;11(11):3240. doi:10.3390/pr11113240

BibTeX
@article{Danielak2023,
  author = {Danielak, Marek and Witaszek, Kamil and Ekielski, Adam and Żelaziński, Tomasz and Dudnyk, Alla and Durczak, Karol},
  title = {Wear Detection of Extruder Elements Based on Current Signature by Means of a Continuous Wavelet Transform},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {11},
  pages = {3240},
  doi = {10.3390/pr11113240}
}
Kostenlos starten →