EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Pressing of Coconut Oil and Evaluation of Its Lubricant Properties

Čestmír Mizera, Zdeněk Aleš, David Herák, Petr Hrabě, Abraham Kabutey, Richard A. M. Napitupulu, Nicoleta Ungureanu

Processes · 22.10.2023 · 11 (10) · 3034

DOI: 10.3390/pr11103034 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 22.10.2023. Verfasst von Čestmír Mizera und 6 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Internal Grant Agency of the Faculty of Engineering, Czech University of Life Sciences Prague, National University of Science and Technology Politehnica Bucharest, Romania.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vegetable oils represent an important element in protecting a sustainable environment. The pursuit of environmentally friendly solutions and the ever-increasing costs of synthetic oil production are increasing the interest in natural vegetable oils. This paper presents and discusses the possibilities of using the oils obtained from coconuts (Cocos nucifera L.) harvested in Indonesia (North Sumatra region), with three maturity levels (green, yellow, and brown), as lubricants. The specific mechanical energy for linear pressing of the green, yellow, and brown types was 22.3, 20.7, and 18.5 J·goil−1, respectively. The water content of the oils obtained from the green, yellow, and brown types was 1786, 2033, and 1902 mg H2O·g−1, respectively. The mathematical models for linear pressing were established. The sizes of the wear area for the green, yellow, and brown types were 25.7, 24.4, and 34.3 mm2, respectively. The UV–visible spectral curves of the oils, in the range of 180–320 nm, were determined. The results of the lubrication properties of the Reichert test showed that better lubrication properties were exhibited by the green and yellow types, which are comparable to the lubricating properties of engine oils. The results from the SEM images also showed a better structure of the worn surface and fewer traces of abrasive wear.

Förderung

  • Internal Grant Agency of the Faculty of Engineering, Czech University of Life Sciences Prague
  • National University of Science and Technology Politehnica Bucharest, Romania

Zitieren

APA

Mizera, Č., Aleš, Z., Herák, D., Hrabě, P., Kabutey, A., Napitupulu, R. A. M., & Ungureanu, N. (2023). Mechanical Pressing of Coconut Oil and Evaluation of Its Lubricant Properties. Processes, 11(10), 3034. https://doi.org/10.3390/pr11103034

Vancouver

Mizera Č, Aleš Z, Herák D, Hrabě P, Kabutey A, Napitupulu RAM, et al. Mechanical Pressing of Coconut Oil and Evaluation of Its Lubricant Properties. Processes. 2023;11(10):3034. doi:10.3390/pr11103034

BibTeX
@article{Mizera2023,
  author = {Mizera, Čestmír and Aleš, Zdeněk and Herák, David and Hrabě, Petr and Kabutey, Abraham and Napitupulu, Richard A. M. and Ungureanu, Nicoleta},
  title = {Mechanical Pressing of Coconut Oil and Evaluation of Its Lubricant Properties},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {10},
  pages = {3034},
  doi = {10.3390/pr11103034}
}
Kostenlos starten →