Numerical Simulation of Fracture Flow Interaction Based on Discrete Fracture Model
Processes · 19.10.2023 · 11 (10) · 3013
DOI: 10.3390/pr11103013 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 19.10.2023. Verfasst von Fanle Meng und 7 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNPC.
Abstract (Originalsprache)
Hydraulic fracturing of horizontal wells is a common method for enhancing production in low-permeability and unconventional oil reservoirs. However, due to the interference between fractures, issues such as decreased production and water channeling often occur in hydraulic fracturing of horizontal wells. Therefore, studying how to mitigate the effects of fracture interference is of great significance for optimizing hydraulic fracturing design and improving oil and gas recovery rates. In this paper, an oil–water two-phase discrete fracture model was established, and the grid dissection was carried out by using the optimization method to obtain a triangular grid that can finely characterize the fracture in geometry. Then, typical discrete fracture models were designed, and the influences of the fracture permeability ratio, absolute fracture scale, oil–water viscosity ratio, and fracture length on the fracture flow interference were investigated separately. The degree of fracture interference was evaluated using the fracture fractional flow rate ratio, remaining oil saturation, and sweep efficiency. This study verified fracture interaction and identified that the threshold value of the fracture permeability ratio is 9 to classify the degree of interference. Sensitivity analysis shows that the absolute size of the fracture has a significant impact on fracture interference, while the impact of the oil–water viscosity ratio and fracture length on fracture interference is relatively small.
Förderung
- CNPC
Zitieren
APA
Meng, F., Wang, Y., Song, X., Hao, M., Qin, G., Qi, Y., Ma, Z., & Wang, D. (2023). Numerical Simulation of Fracture Flow Interaction Based on Discrete Fracture Model. Processes, 11(10), 3013. https://doi.org/10.3390/pr11103013
Vancouver
Meng F, Wang Y, Song X, Hao M, Qin G, Qi Y, et al. Numerical Simulation of Fracture Flow Interaction Based on Discrete Fracture Model. Processes. 2023;11(10):3013. doi:10.3390/pr11103013
BibTeX
@article{Meng2023,
author = {Meng, Fanle and Wang, Youjing and Song, Xinmin and Hao, Mingqiang and Qin, Guosheng and Qi, You and Ma, Zunjing and Wang, Dong},
title = {Numerical Simulation of Fracture Flow Interaction Based on Discrete Fracture Model},
journal = {Processes},
year = {2023},
volume = {11},
number = {10},
pages = {3013},
doi = {10.3390/pr11103013}
}
EUVIMED